Magnavox MRD500VR owner manual Disc Playback, 4Insert a Disc

E9000(P01-54).QX33.latest 03.6.5 2:51 AM Page 21

Before you begin, turn on the TV and set it to the correct Video In channel. Details are on pages 7-15.

1 Press STANDBY-ON y to turn on the System.

2 Press DVD so the red DVD light appears on the front of the System.

3 Press OPEN/CLOSE A (to the right of the disc tray on the front of the System) to open the Disc tray.

4 Place a Disc into the tray. If the DVD is recorded on only one side, place the Disc in the tray with the label facing up and the shiny side facing down.

Some DVDs are recorded on both sides. Make sure the label of the side you want to play is facing up.

5 Press PLAY B. The tray will close and play will begin. If a DVD menu appears instead, see page 54.With some Audio CDs, play will not begin unless you press PLAY B.

You also can press OPEN/CLOSE A or press the tray toward the System to close the tray.

6 Press STOP C to stop playback.

Remember, the DVD Player of this System will play only certain Discs.

See page six for details.

Disc Playback 21

		STANDBY-ON		1
	TIMER SET
	SETUP/	AUDIO/	ANGLE
	PROG	BAND SUBTITLE
	REC	DISPLAY	ZOOM
		C-RESET
	SKIP/	CLEAR	SKIP/
	CH		CH
2
	TITLE	MODE/SPEED	RETURN
		TUNER
	DVD		VCR
	DISC
	MENU		OK
6	STOP		PLAY	5
	REW		FF

PAUSE

3Press OPEN/CLOSE A on the front of the System.

4Insert a Disc.

Helpful Hints

•An “X” may appear at the top right corner of the TV screen when you try a feature. Either the feature is not available on the Disc, or the System cannot access the feature at this time.This does not indicate a problem with the System.

•If a Disc is dirty or scratched, the picture may appear distorted or play may stop. Remove the Disc and turn off the System. Disconnect the power cord, then reconnect it. Clean the Disc, then turn on the System again and reinsert the Disc.You may need to repeat the System’s setup because of the temporary power loss.

•When the DVD or CD light appears on the display panel, the Disc is loaded and ready to play.

•When you press OPEN/CLOSE A or PLAY B (DVD) on the front of the System when the power is off, the System will turn on in DVD mode. Otherwise, the System will turn on in the mode in which it was turned off.

•Do not use the DVD Player features when the System is in Tuner mode.You may hear noises through the speakers or the displays may be incorrect.