Hookups 7
Determining the best possible connection...
Your hookup will be determined by your existing equipment, especially your TV.These guidelines describe which options have the best picture (video) and sound (audio) quality.You will not use all the jacks on the System.
If your TV only has an
If your TV has Component Video In jacks (which could be labelled Y Cr Cb,Y Pr Pb, or YUV and may be green, blue, and red), use the COMPONENT VIDEO OUT jacks (Y Pb/Cb Pr/Cr) for the best picture quality.
If you use only this video connection, only the DVD picture will be available.To see DVD features on the TV, set the TV to its Component Video In channel. Details are on page 12.
If your TV has an
If your TV has a single yellow Video In jack (which may be labelled CVBS, Composite, or baseband), use the yellow VIDEO (DVD/VCR OUT) jack for good picture quality.This connection provides a picture for both the DVD Player and the VCR. Set the TV to its Video In channel.
Details are on page 11.
If you have a Stereo with a Coaxial Digital Audio In jack, this provides the clearest sound for the DVD Player. Connect the System’s DIGITAL AUDIO OUT COAXIAL jack to your Stereo. If you use only this audio connection, only Disc sound (no VCR) will be available. Details are on page 15.
If digital audio connections are not possible, connect the System’s red and white AUDIO (DVD/VCR OUT) jacks to the Audio In jacks of your Stereo or TV. This provides sound for both the DVD Player and the VCR. Details are on pages
Before you begin...
●Refer to the manuals of your TV, Cable Box, Stereo, or other devices as necessary. Note the style of jacks and connectors on the other equipment. Determine how to choose different Audio and Video In channels on your other equipment so you can see and hear the System playing on the TV, Stereo, etc.
●Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after you have finished hooking up everything. Never make or change connections with equipment connected to the power outlet.
Remember...
●Set the TV to the correct Video In channel. Such channels may be called AUX or AUXILIARY IN,
AUDIO/VIDEO or A/V IN, EXT1 or External In, etc.These channels often are located near channel zero. See your TV owner’s manual for details. If you do not see the DVD or VCR playback on the TV, go to the lowest TV channel (01 or 02) and change channels downward until you see the DVD or VCR picture on the TV. Or, if your TV has only a single Antenna In jack and you are using the RF coaxial cable (as described on page eight), set the TV to channel 3 or 4.
To find the right Audio/Video In channel, turn on the System. Press DVD to put the System in DVD mode. With no Disc in the Player, a large DVD logo will appear on the TV screen when you get the TV on the correct Audio/Video In channel or channel 3 or 4.
●Set a separate Stereo (if applicable) to the correct channel or “source” mode.
●Depending on your connection, you may need to purchase additional cables or adaptors.
●To use the VCR features, you must include a connection with the supplied yellow video cable and red/white audio cables or with the supplied RF coaxial cable.
Once you determine the best option, find your choice on pages
