Magnavox MRD500VR Selecting Radio Stations, Helpful Hints, Press AUDIO/BAND to select FM or AM

Selecting Radio Stations 75

	Press TUNER to select Tuner mode. The red TUNER					STANDBY-ON
	light will appear on the front of the System.The current radio		TIMER SET
1 frequency (station number) will appear on the display panel.		2	SETUP/		AUDIO/		ANGLE
				PROG	BAND	SUBTITLE
				REC	DISPLAY		ZOOM		4
			SKIP/		C-RESET		SKIP/
						CLEAR
			CH					CH
				TITLE	MODE/SPEED		RETURN
2	Press AUDIO/BAND to select FM or AM.			DVD	TUNER		VCR		1
				DISC
				MENU			OK
	Press { or B to select a preset radio station.								3
	You also can select a preset radio station by pressing		STOP				PLAY
3 the Number buttons. The preset number will appear in the
	display panel to the left of the station’s frequency.When			REW			FF
	choosing preset stations 10 and above, enter both digits within				PAUSE
	two seconds to ensure you enter the complete number.						SLOW
				1	2	3
	To set up preset radio stations, see page 76.						VCR/TV
				4	5	6
						SEARCH MODE
				7	8	9

		REPEAT REPEAT
+10	0	A-B
SURROUND	SOUND	VOLUME

– +

4 Press SKIP i/CH o or SKIP j /CH p to change the radio frequency by one-tenth. For example, to go from

100.1to 100.2, press SKIP i/CH o. Use these buttons to fine-tune the station you want.

Or, to search for the next available station, press and hold SKIP i/CH o or SKIP j/CH p for one second, then release. SEARCH will appear on the display panel when you release the button.When a station with sufficient signal strength is found, the station will be tuned and searching will stop.You can press and hold SKIP j/CH p to search backward to the last available station.

Helpful Hints

•You cannot use the VCR when the System is in Tuner mode. If you fast forward, rewind, or eject a videotape, you may hear noise through the speakers or some displays may be incorrect.

•You cannot use the Tuner when the System is in VCR mode. Make sure you stop tape play before putting the System in Tuner mode.

•If the sound is distorted during AM reception, press VCR/TV on the remote to reduce the noise. This is effective only for the current AM station.This does not work for every situation.There may be interference from other electrical appliances or weak AM signals.