8 Revision B
5230 IP Appliance User Guide

Installing the 5230 IP Appliance PDA Applications

The 5230 Applications are installed from your computer, with your PDA in its synchronizatio n
cradle (NOT in the 5230 IP Appliance). See “Installing/Upgrading the 5230 IP Appliance
Applications” on page 54 for instructions on installing the 5230 PDA Applications.
Starting the 5230 IP Appliance PDA Applications

Docking your PDA

To dock your PDA in a 5230 IP Appliance
•Slide your PDA downward in the 5230 Personality Module until it ca n’t go down any
further.

Starting the 5230 PDA Phone Application

The 5230 PDA Applications are accessed via the 5230 PDA Phone application main s creen.
To start the 5230 PDA Phone application
1. If the application is not visible, select PDA Phone in the Start menu. Th e 5230 PDA
Phone application becomes the active program.
2. Tap the Connect PDA softkey. The 5230 PDA Phone application connects to the IP
telephone switch.
3. If you have a new phone, you may be asked to enter your r egistration PIN and extension
number (DN) the first time you connect your PDA to the phone. See your system
administrator for more information.
Note: Before docking your PDA in a 5230 IP Appliance, remove it from any protective
case.
Note: You do not need to tap the Connect PDA softkey when you start the 5230 PDA
Phone application for the first time, or when starting the applicatio n after closing it
(using iTask), or after resetting your PDA.