16 Revision B
5230 IP Appliance User Guide
Application ModesThe Feature Keys application has two operating modes:
•Edit: Used to program/edit Feature Keys. You can edit Feature Keys in offline mode.
•Run: Used to invoke features. You must be docked in a 5230 IP Appliance with the
PDA Phone application running to be in Run mode.
To change application modes
1. Start the Feature Keys application (see “Starting the 5230 PDA Phone Application” on
page 8).
2. In the Modes menu, select Edit or Run.
Quick LaunchBy default, you get a feature confirmation screen when you invo ke a feature. You can disable
this by selecting the Quick Launch option.
To enable/disable Quick Launch
1. Start the Feature Keys application (see “Starting the 5230 PDA Phone Application” on
page 8).
2. In the Modes menu, select Quick Launch. A check mark indicates that Quick Launch
is active.
Programming a Feature KeySee the following sections:
•“Call Forward Feature Keys” on page18
•“Speed Dial Feature Keys” on page22
•“Other Features Keys” on page23
Clearing a FeatureYou can erase a feature from a Feature Key. Once you’ve cleared a Feature Key, you cannot
use it until you reprogram it.
To clear a Feature Key
1. Start the Feature Keys application (see “Starting the 5230 PDA Phone Application” on
page 8).
2. In the Modes menu, select Edit.
3. Go to the desired category page, and tap the Feature Key you want to clear.
4. Tap Clear Feature. The Feature Key is cleared, and the current category page window
is displayed.