DVB4136 Direct Vent Gas Fireplace
5.Place the top front log. Set the log by matching the
square hole on the bottom with the square emboss on the left log. Lay the log at an angle to the left over
the fettle. When this log is in place, it must not cover the hole in the left log. (Fig. 53)
6. Place the top center log. Hold the log with the pointed end toward the back. Match the two holes on the bottom of the log with the two pins on the top of the front log. (Refer to Figure 52 for pin loca- tions) Set the log and lay it into the rear log. (Fig. 53)
7.Place the top right log. Hold the log with pointed end to the left. Match the two holes on the bot- tom of the log with the two pins
on the rear log and set the fork on the log over the right front log. (Fig. 53)
8.Place the lava rock on the hearth refractory in the front as desired. (Fig. 53)
Figure 53
Top Center Log
Top Front Log
Top Right Log
Front
Log
LG464
Lava Rock
28 | 20012322 |
