Remote Controls
Optional remote control units are available to control different functions of the appliance.
Model | Functions Controlled |
RC1 | ON/OFF |
RC2 | ON/OFF and Temperature |
IMTFK | Wall mounted thermostat control |
Ceramic Refractory Panels
Ceramic refractory panels are available to line the fire- box area.
Kit | Color |
DV4136CRB | Classic Black |
DV4136CRR | Colonial Red |
DV4136CRG | Silver Gray |
DV4136CRSS | Sandstone |
DV4136CRCG | Country Gray |
Take care when handling the refractory panels as they are fragile until held in place and supported.
Installation Instructions
1.Remove window frame assembly and logs.
2.Remove three (3) screws securing heat shield to combustion dome. (Fig. 80)
3.Place rear ceramic panel in back of unit. (Fig. 81)
4.Place side panels.
5.Replace heat shield, logs and window frame assem- bly.
Heat Shield | Section A |
Heat Shield | |
| (3) |
| Screws |
| Side View |
| Section A |
| H103 |
Fig. 80 Heat shield. |
|
DVB4136 Direct Vent Gas Fireplace
| Rear Ceramic Panel |
| Back of |
| Firebox |
Burner | |
| Rear Log |
| Support |
| H102 |
Fig. 81 | Rear ceramic panel placement. |
Decorative Bay Windows
The bay window kit is available for the DVB4136 only.
Installation
Remove the existing louvre assembly top.
Assemble the Bay Window Kit according to the instruc- tions supplied with the kit. (Fig. 82)
| Upper Grille Assembly |
Ceramic |
|
Refractory | Ceramic |
| Refractory |
Window |
|
Assembly |
|
Base Grille |
|
Assembly | FP1194 |
Fig. 82 Bay window. |
|
Decorative Frame Trims
A selection of decorative frame trim kits are available for mounting around the outside of the appliance to en- hance its visual effect on the room. Installation instruc- tions for each decorative frame trim are included with the frame trim kit. Contact your authorized distributor for details of the trim kits and ordering information for the trim kits applicable to this model appliance.
20012322 | 49 |
