Makita EM2650LH, EM2650UH manual Never straighten or weld damaged cutting tools, First Aid

Never straighten or weld damaged cutting tools.

–Pay attention to the environment. Avoid unnecessary throttle operation for less pollution and noise emissions. Adjust the carburetor correctly.

–Clean the equipment at regular intervals and check that all screws and nuts are well tightened.

–Never service or store the equipment in the vicinity of naked flames.

–Always store the equipment in locked rooms and with an emptied fuel tank.

Observe the relevant accident prevention instructions issued by the relevant trade associations and by the insurance companies. Do not perform any modifications to the equipment as this will endanger your safety.

The performance of maintenance or repair work by the user is limited to those activities as described in the instruction manual. All other work is to be done by an Authorized Service Agent. Use only genuine spare parts and accessories released and supplied by MAKITA.

Use of non-approved accessories and tools means increased risk of accidents.

MAKITA will not accept any liability for accidents or damage caused by the use of non-approved cutting tools and fixing devices of cutting tools, or accessories.

First Aid

In case of accident make sure that a first-aid box is available in the vicinity of the cutting operations. Immediately replace any item taken from the first aid box.

When asking for help, please give the following information:

–Place of accident

–What happened

–Number of injured persons

–Kind of injuries

–Your name

6