Makita EM2650UH, EM2650LH manual Mounting Of Handle, For machines with bike handle models

MOUNTING OF HANDLE

CAUTION: Before doing any work on the equipment, always stop the engine and pull the spark plug connector off the spark plug.

Always wear protective gloves!

CAUTION: Start the engine only after having assembled it completely.

For machines with bike handle models

–Loosen knob (1).

–Place handle (4) between handle clamp (2) and handle holder (3).

–Adjust handle (4) to an angle that provides a comfortable working position and then secure by firmly hand-tightening knob (1).

CAUTION: Do not forget to mount spring (5).

For machines with loop handle

–Fix the loop handle on the shaft as shown.

–To keep a proper distance between the grips, set the loop handle ahead of the arrows.

Engine

Engine

9