Makita HM1214C dimensions Bearing box section, Crank housing section

P 10/ 20

Repair

[3] DISASSEMBLY/ASSEMBLY

[3]-4. Bearing box section, Crank housing section (cont.)

DISASSEMBLING

(5) Disassemble Bearing box section in order of Figs. 19 to 24.

Fig. 19

Even after removing Motor housing, Armature still remains in Crank housing complete. Disassemble Armature by striking the edge of Crank housing complete as illustrated below.

Armature

Fig. 20

Pull off Filter case from Bearing box after removing Filter case cover.

Filter case cover

Filter case

Bearing box complete

Fig. 21

After unscrewing M6x25 Hex Socket head bolts, remove Bearing box by twisting two slotted head screwdrivers inserted between Crank housing complete and Bearing box complete.

Remove Pin 8 that functions for AVT in combination with Pin 6. Pay attention not to lose Pin 8.

M6x25 Hex socket	Bearing box complete	Bearing box
head bolt (3pcs.)		complete	Pin 8

Fig. 22

Remove Retaining ring S-8, and push out Counter shaft with 1R045. Shoulder washer 8 and Needle bearing 1613 can be removed from Bearing box complete together with Counter shaft.

Remove Retaining ring R-25, Ball bearing 608ZZ and Grease cap.

Counter shaft
Needle bearing 1613	Shoulder
	washer 8

Counter
shaft	1R045

1R291

Counter shaft

Bearing box Retaining ring S-8 complete

Grease cap

Retaining ring R-25

Pin 8 Ball bearing 608ZZ