Makita LS0714L, LS0714FL dimensions Repair Disassembling positive lock mechanism of turn base

P 11/ 26

Repair

[11] Disassembling positive lock mechanism of turn base

1.Remove grip 32.

2.Separate lock lever plate and lock lever from turn base by removing tapping screw bind CT 4x16. See Fig. 10-1.

3.Turn lock pin in order to face pin 3 to vertical direction. And remove pin 3 while pushing compression spring 6 toward the grip side. See Fig. 10-2.

4.By pulling off lock pin from turn base, compression spring 6 can be removed from lock pin.

Fig. 10-1
Grip 32	Lock lever plate	Tapping screw
		bind CT 4x16
	Lock lever

Fig. 10-2

	Compression
Pin 3	spring 6
	Lock pin

Push compression spring in the direction designated with arrow (toward grip side).

[12] Assembling positive lock mechanism of turn base

Do the reverse of disassembling procedure with the following attention:

1.The protrusion of lock lever plate has to face the grip side.

2.Apply grease to the threaded portion of the grip.

See Fig. 11.

Fig. 11

Grip 32

Apply grease here.

Tapping screw bind CT 4x16

Projection of lock lever plate

Lock lever plate

Lock lever

Screw holes