Makita RBC411 instruction manual Mounting of protector

Mounting of protector

To meet the applicable safety provisions, only the tool/protector combinations as indicated in the table must be used.

Be sure to use genuine MAKITA cutter blade or nylon cutting head.

–The cutter blade must be well polished, free of cracks or breakage.

–If the cutter blade hits against a stone during operation, stop the engine and check the blade immediately.

–Polish or replace the cutter blade every three hours of operation.

–The outside diameter of the cutter blade must be 255 mm (10-1/32”). Never use any blades surpassing 255 mm (10-1/32”) in outside diameter.

Star Blade	Eddy Blade	Saw Blade	Protector for metal blade
PART NO. 6418501400	PART NO. 6418501900	PART NO. 6418501600	PART NO. 6418026000

CAUTION: The appropriate protector must always be installed, for your own safety and in order to comply with accident-prevention regulations. Operation of the equipment without the guard being in place is not permitted.

– Fix the protector (1) to the clamp (3) with two bolts M6 x 30 (2).

NOTE: Tighten the right and left bolts evenly so that the gap between the clamp

(3) and the protector (1) will be constant.

Otherwise, the protector sometimes may not function as specified.

10