Marantz SA-14S1 28, nSound is interrupted or noise occurs, nCDs cannot be played back, niPod cannot be played back

28
Preparation Connections Playback Settings Appendix
ENGLISH
Tips
nSound is interrupted or noise occurs
Symptom Cause Page
During playback from the USB memory device,
sound is occasionally interrupted.
•When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted. –
nCDs cannot be played back
Symptom Cause Page
Cannot playback when the play button is
pressed, or cannot correctly play back a specific
part of the disc.
•The CD is dirty or scratched. Either clean the CD, or insert a dierent CD. 32
Cannot playback CD-R/CD-RW. •CDs cannot be played back unless they have been finalized. Use a finalized disc.
•This may be caused by poor recording conditions, or the disc itself may be of poor quality. Use a correctly recorded disc.
•The DATA CD playback function of this unit only supports playback of MP3 and WMA files.
33
–
30
“0 0:00” is displayed. •“0 0:00” is displayed if a disc that cannot be played is loaded. 32
“No Disc” is displayed. •“No Disc” is displayed if the disc is loaded upside-down or if no disc is loaded. 32
niPod cannot be played back
Symptom Cause Page
iPod cannot be connected or “Check iPod” is
displayed.
•When using iPod by connecting it to the USB port, some iPod variations are not supported.
•When iPod is connected by using a USB cable other than the genuine cable, iPod may not be recognized. Use a genuine USB
cable.
10
–
Troubleshooting