9
ENGLISH
Connecting to a device with digital audio input connectors
You can connect an AV receiver or D/A converter with digital audio input connectors to this unit
to enjoy digital audio.
OPTICAL
IN
COAXIAL
IN
AV receivers/
D/A converters
NOTE
•Signals on the HD layer of the Super Audio CD cannot be output in digital output. Signals that
can be output using digital output are digital audio signals from audio CDs, CD layers of Super
Audio CDs, USB, iPod, USB-DAC, COAXIAL, and OPTICAL.
•When the input source is USB-DAC, digital audio output stops when signals with a sampling
frequency of 32 kHz and DSD signals are played back.
Connecting to a device with digital audio output connectors
This unit can be used as a D/A converter (“Using as a D/A converter” (vpage20).
OPTICAL
OUT
COAXIAL
OUT
CD transport/
Devices with
digital audio
connectors
NOTE
•Linear PCM signals with a sampling frequency of 32 kHz, 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz,
96 kHz, 176.4 kHz, or 192 kHz can be input into this device.
•Do not input signals other than linear PCM signals, such as Dolby digital, DTS, AAC etc. into
this device. Doing so may cause noise, which may cause damage to the speakers.