I-FLY WIRELESS ROUTER ADSL
3.6.3.1.1 Ethernet
When you click Ethernet, you get the following picture below.
It supports two Ethernet IP addresses in the LAN. With this function, the ADSL Wireless router can support two different IP. Usually, there is only one subnet in LAN and no need to configure a Secondary IP address. The 192.168.1.254 is the default IP address for this ADSL Wireless router.
RIP: RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function.
3.6.3.1.2 Wireless
WLAN Service: Default setting is set to Enable.
Mode: The factory default is 802.11b + g.
•802.11b + g (Mixed mode)
•802.11b
•802.11g
Nitro Mode: Default is enabled for increasing performance in mixed 802.11b and 802.11g wireless networks.
21
