I-FLY WIRELESS ROUTER ADSL
Always on: If you want the router to establish a PPPoE session when starting up and to automatically
Connect to Demand: If you want to establish a PPPoE session only when there is a packet requesting access to the Internet (i.e. when a program on your computer attempts to access the Internet).
Idle Timeout:
Detail: You can define the destination port and packet type (TCP/UDP) without checking by timer. It allows you to set which outgoing traffic will not trigger and reset the idle timer.
RIP: RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function.
MTU: Maximum Transmission Unit. The size of the largest datagram (excluding mediaspecific headers) that IP will attempt to send through the interface.
•RFC 1483 Bridge
VPI and VCI: Enter the information provided by your ISP.
ATM Class: The Quality of Service for ATM layer.
Encapsulation method: Select the encapsulation format, this is provided by your ISP.
Ether Filter Type: Specify the type of ethernet filtering performed by the named bridge interface.
Spanning Bridge Interface: Enable/Disable spanning tree function of modem.
Ether Filter Type:
ALL | Allows all types of ethernet packets through the port. |
|
|
IP | Allows only IP/ARP types of ethernet packets through the port. |
|
|
PPPoE | Allows only PPPoE types of ethernet packets through the port. |
|
|
28