Atlantis Land A02-WRA4-54G manual Port Settings, WPA Pre Shared Key

I-FLY WIRELESS ROUTER ADSL

and Client card settings to generate the same WEP keys. Please note that you do not have to enter Key (0-3) as below when the Passphrase is enabled.

Default Used WEP Key: Select the encryption key ID, please refer to Key (0-3) below.

Key (0-3): Enter the key to encrypt wireless data. To allow encrypted data transmission, the WEP Encryption Key values on all wireless stations must be the same as the router.

There are four keys for your selection. The input format is in HEX [0,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F] style, 5 and 13 HEX codes are required for WEP64 and WEP128 respectively, the separator is “-“.

•WPA Pre Shared Key

WPA Algorithms: TKIP (Temporal Key Integrity Protocol) utilizes a stronger encryption method and incorporates Message Integrity Code (MIC) to provide protection against hackers. WPA Shared Key: The key for network authentication. The input format is in character style and key size should be in the range between 8 and 63 characters.

Group Key Renewal: The period of renewal time for changing the security key automatically between wireless client and Access Point (AP).

3.6.3.1.4 Port Settings

This section allows you to configure the settings for the router’s Ethernet ports to solve some of the compatibility problems that may be encountered while connecting to the Internet, as well allowing users to tweak the performance of their network.

Port # Connection Type: Five options to choose from: Auto, 10M half-duplex, 10M fullduplex, 100M half-duplex or 100M full-duplex. Sometimes, there are Ethernet compatibility problems with legacy Ethernet devices, and you can configure different types to solve compatibility issues. The

23