Manuals / Atlantis Land / Computer Equipment / Network Router

Atlantis Land A02-WRA4-54G manual Embedded Web Server, Universal Plug and Play UPnP

Models: A02-WRA4-54G

1 75

Download 75 pages 25.52 Kb

Page 69

Embedded Web Server:

I-FLY WIRELESS ROUTER ADSL

Embedded Web Server:

HTTP Port: This is the port number the router’s embedded web server (for web-based configuration) will use. The default value is the standard HTTP port, 80. Users may specify an alternative if, for example, they are running a web server on a PC within their LAN.

Management IP Address: You may specify an IP address allowed to logon and access the router’s web server. Setting the IP address to 0.0.0.0 will disable IP address restrictions, allowing users to login from any IP address.

Expire to auto-logout: Specify a time frame for the system to auto-logout the user’s configuration session.

For Example: User A changes HTTP port number to 8081, specifies their own IP address of 192.168.1.55, and sets the logout time to be 100 seconds. The router will only allow User A access from the IP address 192.168.1.55 to logon to the Web GUI by typing: http://192.168.1.254:8081 in their web browser. After 100 seconds, the device will automatically logout User A.

Universal Plug and Play (UPnP):

UPnP offers peer-to-peer network connectivity for PCs and other network devices, along with control and data transfer between devices. UPnP offers many advantages for users running NAT routers through UPnP NAT Traversal, and on supported systems makes tasks such as port forwarding much easier by letting the application control the required settings, removing the need for the user to control advanced configuration of their device.

Both the user’s Operating System and the relevant application must support UPnP in addition to the router. Windows XP and Windows Me natively support UPnP (when the component is installed), and Windows 98 users may install the Internet Connection Sharing client from Windows XP in order to support UPnP. Windows 2000 does not support UPnP.

•Disable: Check to disable the router’s UPnP functionality.

•Enable: Check to enable the router’s UPnP functionality.

UPnP Port: Its default setting is 2800. It is highly recommended for users to use this port value. If this value conflicts with other ports already being used you may wish to change the port.

63

Image 69

Atlantis Land A02-WRA4-54G manual Embedded Web Server, Universal Plug and Play UPnP

Contents

Page Page Copyright I-FLY WIRELESS ROUTER ADSLCE Mark Warning Important Note2.1 CAUTIONS FOR USING THE I-FLY WIRELESS ROUTER 1.4 I-FLY WIRELESS ROUTER ADSL APPLICATION3.2 CONNECTING THE I-FLY WIRELESS ROUTER ADSL 1.2 PACKAGE CONTENTS3.8.2.1.3 Wireless Security I-FLY WIRELESS ROUTER ADSL3.6.3.1 3.6.3.2I-FLY WIRELESS ROUTER ADSL APPENDIX BSUPPORT Easy Configuration and Management Quality of Service and IP ThrottlingIntroduction Chapter1.2 Package Contents 1.3 I-Fly Wireless Router ADSL FeaturesIf any of the above items are missing, please contact your reseller Universal Plug and Play UPnP and UPnP NAT Traversal This protocol is used to enable simple and robust connectivity among stand-alone devices and PCs from many different vendors. It makes network simple and affordable for users. UPnP architecture leverages TCP/IP and the Web to enable seamless proximity networking in addition to control and data transfer among networked devices Page I-FLY WIRELESS ROUTER ADSL 1.4 I-Fly Wireless Router ADSL Application2.1 Cautions for using the I-Fly Wireless Router ADSL Using Wireless ADSL RouterPower Lit when power ONReset connectorPower Switch 2.3 The Rear Ports3.1 Before Configuration Configuration3.2 Connecting the I-Fly Wireless Router ADSL ChapterFor Windows 95/98/ME 3.3 Configuring PC in Windows5. Then select the DNS Configuration tab I-FLY WIRELESS ROUTER ADSLFor Windows NT4.0 2. Select TCP/IP Protocol and click PropertiesI-FLY WIRELESS ROUTER ADSL 2. Double-click LAN Area Connection For Windows3. In the LAN Area Connection Status window, click Properties I-FLY WIRELESS ROUTER ADSL4. Select Internet Protocol TCP/IP and click Properties I-FLY WIRELESS ROUTER ADSL6. Click “OK” to finish the configuration Network Connections 2. Double-click Local Area Connection For Windows XPI-FLY WIRELESS ROUTER ADSL 3. In the LAN Area Connection Status window, click Properties4. Select Internet Protocol TCP/IP and click Properties I-FLY WIRELESS ROUTER ADSL3.4 Factory Default Settings 3.4.1 Username and Password3.4.2 LAN and WAN Port Addresses Enabled 3.6 Configuring with the Web Browser3.5 Information from the ISP WAN PortARP Table Wireless Association Routing Table DHCP Table PPTP Status Save Config to FLASH3.6.1 STATUS Quick StartIPSec Status L2TP Email Status Event Log Error Log NAT Sessions Emails” in Configuration AdvanceUPnP PortMap 3.6.2 Quick Start 3.6.3 Configuration3.6.3.1 LAN LAN, WAN, System, Firewall, VPN, QoS,Virtual Server and Advanced3.6.3.1.1 Ethernet 3.6.3.1.2 WirelessESSID Broadcast 3.8.2.1.3 Wireless SecurityWPA Pre Shared Key 3.6.3.1.4 Port Settings3.6.3.1.5 DHCP 3.6.3.2.1 ISP 3.6.3.2 WANDescription User-definable name for the connection PPPoAI-FLY WIRELESS ROUTER ADSL PPPoE RoutedEther Filter Type RFC 1483 BridgeAllows all types of ethernet packets through the port Allows only IP/ARP types of ethernet packets through the portI-FLY WIRELESS ROUTER ADSL RFC 1483 Routed/RFC1 1577IPoA3.6.3.3 System 3.6.3.2.2 DNS3.6.3.2.3 ADSL 3.6.3.3.1 Time Zone 3.6.3.3.2 Remote Access3.6.3.3.4 Backup / Restore 3.6.3.3.3 Firmware Upgrade3.6.3.4 Firewall Protocol ApplicationPort Firewall High3.6.3.4.1 Configuring Packet Filter I-FLY WIRELESS ROUTER ADSL 3. Click Delete to delete the HTTP rule 4. Click Add TCP Filter5. Input the port number and set the inbound & outbound as Allow Block Duration 3.6.3.4.2 INTRUSION DETECTIONAttack Hacker attack types recognized by the IDSDetect Parameter Blacklist3.6.3.4.4 URL Filtering 3.6.3.4.3 MAC FilteringSYN/FIN/RST/ACK Net Bus ScanRestrict URL Features Keywords FilteringDomains Filtering 3.6.3.4.5 Firewall Log I-FLY WIRELESS ROUTER ADSLLog information can be seen in the Status - Event Log after enabling VPN - PPTP 3.6.3.5 VPNAn Example of Configuring a Remote Access PPTP VPN Dial-in Connection Application DiagramBackground of the Example Configuring PPTP VPN in Remote Side Configuring PPTP VPN in the Office LAN Router3. Enter the IP address of the ADSL Router located in the office Lan or Dynamic DNS name I-FLY WIRELESS ROUTER ADSL Background of the Example Application Diagram Configuring PPTP VPN in the OfficePPTP Status Remote LAN An Example of Configuring a LAN-to-LAN PPTP VPN ConnectionOffice LAN Product CodeConfiguring PPTP VPN in the Remote Lan Configuring PPTP VPN in the Office LanI-FLY WIRELESS ROUTER ADSL PPTP Status in the Office LANLocal VPN - IPSecRemote ProposalMD5 A one-way hashing algorithm that produces a 128-bit hash Select the Apply button to update the settings Authentication An Example of Configuring a LAN-to-LAN IPSec VPN ConnectionVPN IPSec EncryptionConfiguring IPSec VPN in the Office LAN Configuring IPSec VPN in the Remote LANI-FLY WIRELESS ROUTER ADSL 3.6.3.6 QoS 3.6.3.6.1 PrioritizationHigh I-FLY WIRELESS ROUTER ADSL 3.6.3.6.2 IP Throttling3.6.3.7 Virtual Server 3.6.3.8.1 Static Routing 3.6.3.8 Advanced3.6.3.8.3 Check EMails 3.6.3.8.2 Dynamic DNS3.6.8.3.4 Device Management Universal Plug and Play UPnP Embedded Web ServerSimple Network Management Protocol Traps supported Cold Start, Authentication FailureSNMP Version SNMPv2c and SNMPv3 RFC1650 EtherLike-MIB dot3Stats3.6.5 Logout 3.6.4 Save Configuration to FlashRFC 1474 PPP/Bridge MIB RFC1573 IfMIB ifMIBObjects Group RFC1695 atmMIB atmMIBObjectsProblems Starting Up the ADSL Firewall Router TroubleshootingProblems with the WAN Interface Problems with the LAN InterfaceTechnical Features SpecificationLED Indicators WirelessAPPENDIX B SupportSupport Atlantis Land SpA Viale De Gasperi, 122 20017 Mazzo di RhoMII-FLY WIRELESS ROUTER ADSL