I-FLY WIRELESS ROUTER ADSL
Simple Network Management Protocol:
SNMP Access Control (Software on a PC within the LAN is required in order to utilize this function) SNMP V1 and V2:
•Read Community: Specify a name to be identified as the Read Community, and an IP address. This community string will be checked against the string entered in the configuration file. Once the string name is matched, user obtains this IP address will be able to view the data.
•Write Community: Specify a name to be identified as the Write Community, and an IP address. This community string will be checked against the string entered in the configuration file. Once the string name is matched, users from this IP address will be able to view and modify the data.
•Trap Community: Specify a name to be identified as the Trap Community, and an IP address. This community string will be checked against the string entered in the configuration file. Once the string name is matched, users from this IP address will be sent SNMP Traps.
SNMP V3:
Specify a name and password for authentication. And define the access right from identified IP address. Once the authentication has succeeded, users from this IP address will be able to view and modify the data.
SNMP Version: SNMPv2c and SNMPv3
SNMPv2c is the combination of the enhanced protocol features of SNMPv2 without the SNMPv2 security. The "c" comes from the fact that SNMPv2c uses the SNMPv1 community string paradigm for "security", but is widely accepted as the SNMPv2 standard.
SNMPv3 is a strong authentication mechanism, authorization with fine granularity for remote monitoring.
Traps supported: Cold Start, Authentication Failure.
The following MIBs are supported:
•RFC 1213
ICMP group TCP group UDP group
EGP (not applicable) Transmission SNMP group
•RFC1650
•RFC 1493 (Bridge MIB): dot1dBase group dot1dTp group
dot1dStp group (if configured as spanning tree)
•RFC 1471 (PPP/LCP MIB):
pppLink group pppLqr group
•RFC 1472 (PPP/Security MIB): PPP Security Group)
•RFC 1473 (PPP/IP MIB):
64
