Random playback
1 During stop mode, press
RANDOM.
The “RNDM” indicator on the display lights.
2 Press 1.
The tracks start playing in random order.
nnStopping random playback
Press RANDOM during stop mode.
The “RNDM” indicator on the display goes off.
NOTE
•Each press of 9 during random play changes the track in random manner.
•The random playback mode is canceled if you set power to standby, turn off power, or open the disc tray.
Playing tracks in a specific order (Program playback)
1 During stop mode, press
PROGRAM.
“PROG” lights in the display, and the mode switches to program playback mode.
2 Use 0 – 9, +10 to select the tracks you want to program.
GExampleH
To program tracks 3 and 12 to be played in that order, press 3, +10, and 2 one after the other.
3 Press 1.
Playback starts in the programmed order.
nnAdding tracks for program playback
Tracks can be added to the end of program when program is remaining (“PROG” indicator is lighting up) and in stop mode.
Use 0 – 9, +10 to select the tracks you want to program.
nnChecking programmed track orders
While stopped, press 9.
Each time you press it, tracks are displayed in the order in which they are programmed.
nnCanceling a track from program playback
While stopped, press CLEAR.
When CLEAR is pressed, tracks are deleted in order from the last programmed track.
nnClearing the all programmed track
Press PROGRAM during stop mode.
•Program can also be cleared by pressing OPEN/CLOSE on the main unit to open the disc tray.
ENGLISH
Playback CDs
You can specify up to 20 tracks each for program playback.
NOTE
•Programmed playback is not possible with MP3 and WMA files.
•The program playback mode is canceled if you set power to standby, turn off power, or open the disc tray.
Stopping digital outputs
Stops all media and source digital signal outputs from the rear panel’s digital audio output connectors (COAXIAL, OPTICAL) to minimize digital audio output circuit noise which could interfere with the analog audio output signal.
1 During stop mode, press MENU.
2 Use ui to select “Digital
Out”, and press ENTER.
3 Use ui to select “Off”, and press ENTER.
[Selectable items]
On : Outputs the digital signal.
Off : Digital signal is not output.
•When digital output is turned off, the “D OFF” indicator lights up on the display.
•The “Digital Out” has a memory retention function where the settings remain stored and unchanged even when the disc is changed or the power is turned off.
Preparation
Connections
Playback
Settings
Tips
Appendix
16
