Marantz SR4400 manual 1. 3, MENU STRUCTURE of Speaker Distance setup

ENGLISH	L&R :	SW :
	Set the distance from the front left and right	Set the distance from the subwoofer to your
	speakers to your normal listening position	normal listening position between 1 and 30 feet
	between 1 and 30 feet in 1.0 foot interval (0.3 to	in 1.0-foot intervals (0.3 to 9 meters in 0.3-meter
	9 meters in 0.3-meter intervals).	intervals).
	C :	SB:
	Set the distance from the center speaker to your	Set the distance from a surround back speaker
	normal listening position between 1 and 30 feet	to your normal listening position between 1 and

SPEAKERS LEVEL

Here you will set the volume for each speaker so that they are all heard by the listener at the same level.

Note:

•The speaker level settings is not available in 6.1channel input mode and S-Direct mode.

2. Using theandcursor buttons, adjust the volume level of the noise from the center speaker so that it is the same level as the front left speaker (Note that this can be adjusted to any level between –10 and +10 dB in 1dB intervals).

in 1.0 foot interval	30 feet in 1.0-foot intervals (0.3 to 9 meters in
(0.3 to 9 meters in 0.3-meter intervals).	0.3-meter intervals).
SLR:	Note
Set the distance from the surround left and right
	• Speakers that you selected “No” or “None” for in
speaker to your normal listening position
	the Speaker Size menu will not appear.
between 1 and 30 feet in 1.0 foot interval (0.3 to
9 meters in 0.3-meter intervals).

MENU STRUCTURE of Speaker Distance setup

TEST MODE : Selects “MANU (manual) ” or “AUTO” for generating mode of test toneorcursor button.

If you select “AUTO” by pressing thebutton, the test tone will be cycled through in a circular pattern which is L (Left) → C (Center) → R (Right) → SR (Surround Right) → SB (Surround Back) → SL (Surround Left) → SW (Subwoofer → L →.. increments of 2 seconds for each channel.

Maximum

1 dB interval

Reference

+10dB

+9dB

button

0dB

Speaker

Size setup

Speaker

L&R

C

Distance

Maximum	30 feet	(3.0m)
	29 feet	(2.7m)	button

Using the and cursor buttons, adjust the volume level of the noise from the speaker so that it is the same level for all speaker.

When you select “TO MAIN MENU” by pressing the OK button, you can return the SETUP MAIN MENU by pressing the OK button . Or press the orcursor button to select “EXIT” then press the OK button to exit the SETUP MENU.

1 dB interval

Minimum

button

-9dB

-10dB

(SW -15 dB)

Speaker

Distance setup

SLR

SW

SB

1 foot (0.3 m) interval
	2 feet	(0.6m)	button
Minimum	1 feet	(0.3m)

Or press the or cursor button to select “RETURN” then press the OK button to return the previous “SPEAKER DISTANCE” setup.

If you select “MANU”, adjust the output level of each speaker as follow.

		AUX	AMP
2. 5.	TV		MAIN
	VOL.	SLEEP	MUTE VOL.

3. Press thecursor button again. This unit will now emit the pink noise from the front right speaker.

4. Repeat steps 2 and 3 above for the front right and other speakers until all speakers are adjusted to the same volume level.

5. When you select “TO MAIN MENU” by pressing the OK button, you can return the

	NEXT	EXIT	TO MAIN MENU	RETURN
Speaker		exit SETUP	MAIN	Speaker
Level setup		MENU	MENU	Size setup

OSD		MENU
1. 5.
	OK
1. 3. 5.			5.
SETUP/		MENU OFF
T.TONE
S-DIRECT	AUTO
			DTS
	1	2	3
NIGHT	CSII	EX/ES	DSP

4 5 6

1. When you select “MANUAL” in T.MODE menu by pressing theorbutton, this unit will emit a pink noise from the front left speaker. At this time, adjust the desired level of the master volume. Remember the level of this noise and

then press thebutton. This unit will emit the

pink noise from the center speaker.

SETUP MAIN MENU by pressing the OK button . Or press theorcursor button to select “EXIT” then press the OK button to exit the SETUP MENU.

Or press the or button to select “RETURN” then press the OK button to return the previous “SPEAKER DISTANCE” setup.

18