Marantz SR4400 manual Basic Operation Play Back

SURR. BACK :

Adjust the volume level of the surround back speaker between -10 dB and +10 dB in 1 level interval with or cursor button.

•If “None” was selected for the Surround back speakers setting in the Speaker size, then this setting will not appear.

CENTER :

Adjust the volume level of the center speaker between -10 dB and +10 dB in 1 level interval with or cursor button.

•If “None” was selected for the Center speaker setting in the Speaker size, then this setting will not appear.

SUB W :

Adjust the volume level of the subwoofer speaker between -15 dB and +10 dB in 1 level interval with or cursor button.

•If “None” was selected for the Subwoofer speaker setting in the Speaker size, then this setting will not appear.

When you select “TO MAIN MENU” by pressing the or button, you can return the SETUP MAIN MENU by pressing the OK button.

Note:

•SURR.L/R, SURR. BACK, CENTER and SUB W volume level are synchronized with SETUP MAIN MENU Speaker Level. (Page 18)

MENU STRUCTURE of SURROUND setup

MODE / Speaker

BASIC OPERATION (PLAY BACK)

SELECTING AN INPUT SOURCE.

Before you can listen to any input media, you must first select the input source at the SR4400.

E.G. : DVD

R SR4400

						POWER
						TV	VCR1	DSS/VCR2	DVD
CLEAR	MEMORY	TUNING/PRESET		F/P	MODE
						TUNER	CD	TAPE	CDR/MD
A/D	HT-EQ			DISPLAY		MUTE
6.1 CH-IN		VCR1	CDR/MD	TAPE	CD	TUNER	AUX	AMP
						TV			MAIN
						VOL.	SLEEP	MUTE	VOL.
						OSD		MENU

To select DVD, simply press the DVD button on the front panel or press DVD button on the remote. After you have selected DVD, simply turn on the DVD player and play the DVD.

• The input name will appear in the display on the

front-panel.

• As the input is changed, the SR4400 will

automatically switch to the digital input,

surround mode, attenuation, and night mode

status that were entered during the configuration

process for that source.

To select the surround mode during playback, turn the SURROUND knob on the front panel or press the surround mode button on the remote .

ADJUSTING THE MAIN VOLUME

				TV	VCR1	DSS/VCR2	DVD
				VOLUMEVOLUME
				TUNER	CD	TAPE	CDR/MD
			DOWNDOWN	UPUP
					AUX	AMP
ET	F/P	MODE
				TV			MAIN
	DISPLAY		MUTE	VOL.	SLEEP	MUTE	VOL.
CDR/MD	TAPE	CD	TUNER
					OSD	MENU

OK

Adjust the volume to a comfortable level using the VOLUME control knob on the front panel or MAIN VOL. / buttons on the remote.

To increase the volume, turn the VOLUME knob to clockwise or press MAIN VOL. button on the remote, to decrease the volume, turn it to counterclockwise or press MAIN VOL. button on the remote.

Notes:

• The volume can be adjusted within the range of –

∞ to + 18 dB, in steps of 1 dB.

• However, when the channel level is set as

described on page 18, if the volume for any

channel is set at +1 dB or greater, the volume

cannot be adjusted up to +18 dB.

To adjust the bass effect , press BASS	or	ENGLISH
BASS on the remote.
To adjust the treble effect , press TREBLE	or
TREBLE on the remote.

Notes :

• The tone control function can work for the front left and front right speakers.

• When Source Direct mode is set, tone control is disable.

TEMPORARILY TURNING OFF THE

SOUND

				TV	VCR1	DSS/VCR2	DVD
				VOLUME
				TUNER	CD	TAPE	CDR/MD
			DOWN	UP	AUX	AMP
ESET	F/P	MODE		TV			MAIN
				VOL.	SLEEP	MUTE	VOL.
	DISPLAY		MUTEMUTE
CDR/MD	TAPE	CD	TUNER
				OSD		MENU

OK

To temporarily silence all speaker outputs such as when interrupted by a phone call, press the MUTE button on the front panel or remote.

This will interrupt the output to all speakers and the head-phone jack, but it will not affect any recording or dubbing that may be in progress.

7.SURROUND

setup

SURROUND MODE

C(Center)LEV

SL(Surround Left)LEV

• When an audio source is selected, the last video

input used remains routed to the VCR1 & DSS/

VCR2 Outputs and Monitor Outputs. This

permits simultaneous viewing and listening to

different sources.

• When a Video source is selected, the video

signal for that input will be routed to the Monitor

(In this case the maximum volume adjustment

range is “+18 dB - Maximum value of channel

level)

When the system is muted, the display will show “MUTE” .

Press the MUTE button again to return to normal operation.

SR(Surround Right)LEV

SB(Surround back)LEV

S(Subwoofer)LEV

TO MAIN MENU EXIT

exit SETUP

MENU

Outputs jack and will be viewable on a TV

monitor connected to the SR4400.

SELECTING THE SURROUND MODE

E.G. : AUTO SURROUND

					OK
	AV SURROUND RECEIVER SR4400
	SURROUND
				SETUP/		MENU OFF
				T.TONE
				S-DIRECT	AUTO		DTS
					1	2	3
				NIGHT	CSII	EX/ES	DSP
		CLEAR	MEMORY		4	5	6
				DISPLAY	M-CH ST	STEREO	6.1CH IN
		A/D	HT-EQ		7	8	9
POWER ON/STANDBY	PHONES	6.1 CH-IN	VCR1	CLEAR	MEMO	A/D	P.SCAN

0

CHANNEL/SKIP

BASS TREBLE TUNE/SEARCH

ADJUSTING THE TONE(BASS &

TREBLE) CONTROL.

S-DIRECT	AUTO		DTS
	1	2	3
NIGHT	CSII	EX/ES	DSP
	4	5	6
DISPLAY	M-CH ST	STEREO	6.1CH IN
	7	8	9
CLEAR	MEMO	A/D	P.SCAN
		0
		CHANNEL/SKIP
BASS	TREBLE	TUNE/SEARCH
	MODE	DISP./RDS	F.DIRECT
+/A /ANT	–/B /VCR	ATT.	PTY

DISC/DECK

During a listening session you may wish to adjust the Bass and Treble Control to suit your listening tastes or room acoustics.

USING THE SLEEP TIMER

POWER

TV	VCR1	DSS/VCR2	DVD
TUNER	CD	TAPE	CDR/MD
	AUX	AMP
TV	SLEEP	MUTE	MAIN
VOL.			VOL.
	OSD	MENU

To program the SR4400 for automatic standby, press SLEEP buton on the remote.

Each press of the button will increase the time before shut down in the following sequence.

21