g6.1 CHANNEL DIRECT IN indicator
This indicator lights up when the
hAUTO.SURR (Auto Surround mode)
indicator.
This indicator illuminates to show that the AUTO SURROUND mode is in use.
¡4ATT (Attenuation) indicator
This indicator lights when the attenuation function is active.
¡5NIGHT mode indicator
This indicator lights when the SR4400 is in the Night mode, which reduces the dynamic range of digital program material at low volume levels.
REAR PANEL |
|
|
|
| ENGLISH | |
z | x | c | v | b n | ⁄2 |
jDIRECT (Soruce direct) indicator
This indicator lights when the SR4400 is in the SOURCE DIRECT mode.
kEQ mode indicator
This indicator lights when the
lSLEEP timer indicator
This indicator lights when the seep timer function is in use.
¡0DIGITAL Input Indicator
This indicator lights when digital input has been selected.
¡1ANALOG input indicator
¡6Main Information Display
This display shows messages relating to the status, surround mode, tuner, volume level or other aspects of unit’s operation.
DVD
IN
L
R
ININ
Ω)
CENTER | R SURROUND L |
⁄1 ⁄0 .
SURR.
SURROUND
BACK
UNSWITCHED 1
MODEL NO. SR4400
SERIAL NO.
R FRONT L
AC OUTLET (120V60Hz)
,m
⁄3
This indicator lights when an analog input source has been selected.
¡2SIGNAL FORMAT indicators
2DIGITAL, EX, 2 SURROUND, dts, ES, PCM and 96kHz
When the selected input is a digital source, some of these indicators will light to display the specific type of signal in use.
¡3ENCODED CHANNEL STATUS indicators
These indicators display the channels that are encoded with a digital
input signal. If the selected digital input signal is Dolby Digital 5.1ch or DTS 5.1ch, “L”, “C”, “R”, “SL”, “SR” and “LFE” will light up.If the digital input signal is 2 channel
If Dolby Digital 5.1ch signal with Surround EX flag or
zFM antenna terminal (75 ohms)
Connect an external FM antenna with a coaxial cable, or a cable network FM source.
AM antenna and ground terminals
Connect the supplied AM loop antenna. Use the terminals marked “AM” and “GND”. The supplied AM loop antenna will provide good AM reception in most areas. Position the loop antenna until you hear the best
xAUDIO IN/OUT (CD, TAPE, CDR/MD, TV,
DVD, VCR1, DSS/VCR2)
These are the analog audio inputs and outputs. There are 7 audio inputs (4 of which are linked to video inputs) and 4 audio outputs (2 of which are linked to video outputs). The audio jacks are nominally labeled for cassette tape decks, compact disc players,DVD players and etc.... The
audio inputs and outputs require
cVIDEO IN/OUT (TV, DVD, VCR1 and DSS/
VCR2)
There are 4 composite video inputs and 2 composite video outputs. Connect VCR, DVD player, and other video components to the video input.
The output channels can be used to be connected to video recorder for making recordings.
v
There are 2
Connect VCR, DVD player, and other video components to the
The output channel can be used to be connected to video recorder for making recordings.
bMONITOR OUT
There are 2 monitor outputs and each one includes both composite video and
5