ENGLISH | n Subwoofer Output |
subwoofers, either powered or with a 2 channel | |
| Connect this jack to the line level input of a |
| powered subwoofer. If an external subwoofer |
| amplifier is used, connect this jack to the |
| subwoofer amplifier input. If you are using two |
| subwoofer amplifier, connect a “Y” connector to |
| the subwoofer output jack and run one cable from |
| it to each subwoofer amplifier. |
mPreamp Outputs (L, R, SL, SR, SB, C) Jacks for L (front left), R (front right), C (Center), SL (surround left), SR (surround right) and SB (surround back).
Use these jacks for connection to some external power amplifiers.
,6.1 CHANNEL INPUT
By connecting a DVD Audio player, SACD multi channel player, or other component that has a multi channel port, you can playback the audio with 5.1 channel or 6.1 channel output.
.Speaker outputs terminals
Six terminals are provided for the front left, front right, front center, surround left, surround right and surround back speakers.
⁄0REMOTE CONT. IN/OUT terminals
Connect to a Marantz component equipped with remote control
⁄1DIGITAL INPUT (Dig.1 - 4) / OUTPUT (coaxial, optical)
These are the digital audio inputs and outputs. There are 2 digital inputs with coaxial jacks, 2 with optical jacks.
The inputs accept digital audio signals from a compact disc, LD, DVD, or other digital source component.
For digital output, there is 1 coaxial output and 1 optical output.
The digital outputs can be connected to MD recorders, CD recorders, DAT decks, or other similar components.
⁄2Power cable
Connect to AC power outlet.
SR4400 can be powered by 120 V AC only.
Caution:
•In order to avoid potential
⁄3AC OUTLETS
Connect the AC power cables of components such as a DVD and CD player to these outlets. SWITCHED and UNSWITCHED outlets are provided.
The one marked SWITCHED provides power only when the SR4400 is turned on and is useful for components which you use every time you play your system.
The one marked UNSWITCHED is always live as long as the SR4400 is plugged into a live outlet. A component connected here may be left on permanently, or may be switched off with its own power switch.
Caution:
•In order to avoid potential
•The capacity of these AC outlets are 100W. Do not connect devices that consume electricity more than the capacity to these AC outlets. If total power consumption of connected devices exceeds the capacity, protection circuit shuts down the power supply.
REMOTE CONTROL
OPERATION
FUNCTION AND OPERATION
The provided remote control unit is a universal re-
mote controller. The POWER button, numeric but- tons and control buttons are used in common across
different input source components.
The input source controlled with the remote control
unit changes when one of the input selector but- tons is pressed.
| POWER |
|
|
| z |
|
|
|
|
| x |
| TV | VCR1 | DSS/VCR2 | DVD |
|
| TUNER | CD | TAPE | CDR/MD | c |
|
| AUX | AMP |
|
|
¤4 | TV |
|
| MAIN | v |
VOL. | SLEEP | MUTE | VOL. | ||
¤3 |
|
|
|
| b |
¤2 | OSD | MENU | n | ||
|
| OK |
| m | |
|
|
|
| ||
¤1 | SETUP/ | MENU OFF |
| , | |
|
| ||||
¤0 | T.TONE |
|
|
| |
AUTO |
| DTS |
| ||
⁄9 |
| 1 | 2 | 3 |
|
NIGHT | CSII | EX/ES | DSP |
| |
|
| 4 | 5 | 6 |
|
⁄8 | DISPLAY | 6.1CH IN. | |||
⁄7 |
| 7 | 8 | 9 | ⁄0 |
CLEAR | MEMO | A/D | P.SCAN | ||
⁄6 |
|
| 0 |
| ⁄1 |
|
| CHANNEL/SKIP | |||
⁄5 | BASS | TREBLE | TUNE/SEARCH |
| |
⁄4 |
| MODE | DISP./RDS F.DIRECT | ⁄2 | |
|
| ||||
| +/A /ANT | ATT. | PTY |
| |
| DISC/DECK |
|
| ⁄3 |
SYSTEM REMOTE CONTROLLER
RC5400SR
zTransmitting indicator
Lights up during a button is pressed and an infrared
signal is sending.
x(Main) POWER buttons
Press to switch the power of the SR4400 ON or OFF after pressing the AMP button.
cInput selector buttons/ FUNCTION
SELECTOR buttons (AUDIO/VIDEO INPUT)
These buttons are used to select a Audio or Video source component. Press one of these buttons once
to change the function of the remote control. Press
same button within 2 seconds, the input function of
the SR4400 is changed.
Note:
•CDR/MD button is set CDR function at initial. To switch MD function, press and hold down CDR/ MD button and press 2 button.
•To return CDR function, press and hold down CDR/MD button and press 1 button.
•AUX button is unavailable for SR4400.
v MAIN VOLUME UP ( ) /DOWN ( ) buttons Main volume control of the SR4400. The front, sur- round, center and subwoofer channel volumes con- trolled by these buttons simultaneously.
bMUTE button
Muting button of the SR4400. Press this button de- crease the sound temporarily . Press this button again to return to the previous sound.
When this button is pressed, “MUTE” indicator lights up.
nMENU button
This button is used to enter the SETUP MAIN MENU.
mCursor buttons ( , , , , OK)
Use these button when operating the SETUP MAIN MENU.
See page 15.
,MENU OFF button
This button is used to exit from the SETUP MAIN MENU.
6