Marantz SR9600 manual DC Trigger Setup, OK/ENTER button, You can select Main ROOM, Multi

Note:

•This setting can be changed when the SURR B is set to “NONE” in the SPEAKER SIZE menu and “SPEAKER C” is in the OFF position on the rear panel. When this setting is unavailable, “✽✽✽” is displayed.

•If “VOLUME” is set to “FIXED”, the multiroom output level cannot be adjusted from the A or B room.

•SPKR cannot be on for both Room A and Room B at the same time.

After you complete this portion of the setup, move the cursor to “RETURN” with the or cursor buttons and press the OK/ENTER button.

5-2 DC TRIGGER SETUP

This unit has 4 DC trigger control jacks, which can be used to link with input functions for the main room or multiroom.

Each trigger can be setup separately.

1. Select “5. PREFERENCE” from MAIN MENU with theorcursor buttons and press the

OK/ENTER button.

2. Select “DC TRIGGER SETUP” with the , ,

,andcursor buttons.

3.Press the OK/ENTER button to enter the selection.

D C T R I G G E R			S E T U P
D C T R I G - 1 :		M A I N R O OM
D V D	: O N	T A P E		: O F F
L D	: O F F C D - R			: O F F
T V	: O F F C D			: O F F
D S S	: O N	T U N E R 1 : O N
V C R 1 : O F F T U N E R 2 : O F F
V C R 2 : O F F A U X 2				: O F F
A U X 1 : O F F 7 . 1 C H : O F F
R E T U R N				E X I T

4. You can select “MAIN ROOM”, “MULTI

ROOM A”, “MULTI ROOM B”, “REMOTE” or

“DISABLE” with theorcursor buttons.

Note:

•When set to “REMOTE”, DC trigger output can be controlled from RC3200B.

5.Select desired input source with the or cursor buttons.

6.Set to “ON” or “OFF” with the or cursor buttons.

7.After you complete this portion of the setup, move the cursor to “RETURN” with theor cursor button and press the OK/ENTER button.

Note:

•When an input source that is on in the set room is selected, voltage is output to the DC TRIGGER output terminal.

ENGLISH

45