@3DISPLAY button
When this button is pressed, the FL display mode is changed as follows :
Normal display → Level meter→ Auto display off → Display off → Normal display.
The display off indicator “DISP” is illuminated when Display off is selected.
@4MRAC button/MIC jack
Press this button to automatically measure speaker characteristics using the included microphone
FL DISPLAY AND INDICATOR |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Note: | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| • This indicator flashes if the input signal cannot be | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| f g | h jk | l ¡0 ¡1 | ¡2 |
| ¡3 ¡4 | detected. | |||||||||||||
|
|
| ||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ¡3DIGITAL/ANALOG input indicator |
|
|
| MULTI A.B.SPK SPKR |
| A.B | PEAK ATT | i.LINK |
| DIGITAL |
|
| |||||||||
|
|
| SLEEP |
| NIGHT HDMI |
| DIGITAL |
|
|
|
| DIGITAL | ||||||||
|
|
|
|
|
|
|
| |||||||||||||
Normal display |
|
|
|
|
| SURROUND |
|
| ¡ | This indicator is illuminated when a digital input | ||||||||||
|
|
|
|
|
| |||||||||||||||
d |
|
|
| L | C | R |
|
| has been selected. | |||||||||||
| DOLBY DIGITAL EX |
|
| SL S | SR |
|
| |||||||||||||
|
|
|
|
|
|
|
| This indicator is illuminated when an analog input | ||||||||||||
| s |
|
|
|
|
|
|
|
|
| dB |
| LFE |
|
|
| ¡ | ANALOG | ||
|
|
|
|
|
|
|
|
|
|
| +18.0 |
|
|
|
|
|
|
| source has been selected. | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ENGLISH
@5SPEAKER A/B button
Press this button to select speaker system A and/or B.
@6INFRARED receiver window
This window receives infrared signals for the remote control unit.
@7INFRARED transmitter window
This window transmits infrared signals for the
When the display is OFF
When operating
the SR9600 as a tuner
a
DISP
¡8 ¡7
ANALOG ¡
AUTO TUNED ST
¡4
TUNED ST
¡4SIGNAL FORMAT and TUNER indicators
2DIGITAL
This indicator is illuminated when a Dolby Digital signal is input.
EX
This indicator is illuminated when a Dolby Digital EX signal is input.
dts
This indicator is illuminated when a DTS signal is input.
ES
remote control unit.
Opening and closing the front panel door
When you want to use the controls behind the front panel door, open the door by gently pressing on the lower part of the panel. Keep the door closed when not using these controls.
Caution:
•Be careful not to pinch your fingers between the door and the panel.
aDISP (Display Off) indicator
This indicator is illuminated when the SR9600 display is turned off.
sSURROUND mode / i.LINK indicator
This indicator is illuminated to show that the surround mode is in use.
It also displays i.LINK information.(See page 28)
dMain Information Display
This display shows messages relating to the status, input source, tuner, audio input mode or other aspects of unit’s operation.
fSLEEP timer indicator
This indicator is illuminated when the sleep timer function in the main room is in use.
gMultiroom system indicator
This indicator is illuminated when the multiroom system is active.
hV (Video)-OFF mode indicator
This indicator is illuminated when the Video off mode is selected.
jSPKR (Speaker) A/B indicator
This indicator displays which speaker system is active.
kRe-EQ indicator
This indicator is illuminated in the
lNIGHT mode indicator
This indicator is illuminated when the SR9600 is in the Night mode, which reduces the dynamic range of digital program material at low volume levels.
¡0PEAK indicator
This indicator is a monitor for an analog audio input signal. If the selected analog audio input signal is greater than what the internal processor can hold, this is illuminated If this happens, you should press the ATT button on the remote control unit.
(See page 12)
¡1ATT (Attenuation) indicator
This indicator is illuminated when the attenuation function is active.
¡2HDMI/i.LINK indicator
HDMI
This indicator is illuminated when the audio signal input from the HDMI jacks is being played back. i.LINK
This indicator is illuminated when the audio signal input from the i.LINK connector is being played back.
This indicator is illuminated when a DTS ES signal is input.
96/24
This indicator is illuminated when a DTS 96/24 signal is input.
PCM
This indicator is illuminated when the input signal is PCM (pulse code modulation).
HDCD
This indicator is illuminated when the input signal is from a HDCD.
Sampling frequency
This indicator displays the sampling frequency when a PCM or multi channel PCM signal is input. 32, 44.1 and 48 kHz are not displayed.
This indicator is illuminated when the input signal is from a SACD.
This indicator is illuminated when the input signal is multi channel PCM.
AUTO
This indicator is illuminated when the tuner’s auto mode is in use.
TUNED
This indicator is illuminated when a station is being received with sufficient signal strength to provide acceptable listening quality.
ST (Stereo)
This indicator is illuminated when an FM station is being received in stereo.
7