Marantz SR9600 Auto Preset Memory, Recalling a Preset Station, Checking the Preset Stations

PRESET MEMORY

You can preset up to 50 AM/FM stations in any order. This memory is shared by both tuners 1 and 2.

For each station, you can memorize the frequency and reception mode if desired.

AUTO PRESET MEMORY

This function automatically scans the AM and FM band and enters all stations with proper signal strength into the memory.

2. 4. 1. 3. 5.

MANUAL PRESET MEMORY
3.	2. 4.	wed Jun 01		4:40pm
		2/2	Tuner 1
		Tuner 1 : Key/RDS
	3.
	2.

RECALLING A PRESET STATION

1.	wed Jun 01		4:40pm
	1/2	Tuner 1
		Tuner 1 : Main
	1.

PRESET SCAN

1.

3.

wed Jun 01		4:40pm
1/2	Tuner 1
	Tuner 1 : Main

3.

ENGLISH

1. To select FM, press the BAND button on the front panel.

2. While pressing the MEMORY button, rotate

the GYRO TUNING dial.

“AUTO PRESET” will appear on the display,

and scanning starts from the lowest frequency.

3. Each time the tuner finds a station, scanning will pause and the station will be played for five seconds.

During this time, the following operations are possible.

The band can be changed by pressing the

BAND button.

4. If no button is pressed during this period, the

current station is memorized in location Preset 02.

If you wish to skip the current station, rotate the GYRO TUNING dial during this period. This station is skipped and auto presetting

continues.

5. Operation stops automatically when all 50

preset memory positions are filled or when

auto scanning has reached the upper limit of

all bands. If you desire to stop the auto preset memory at anytime, press the CLEAR button.

(Using the SR9600)

1. Tune into the desired radio station. (See the “MANUAL TUNING” or “AUTO TUNING”).

2. Press the MEMORY button on the front panel. “– –“ (preset number) starts blinking on the display.

3. Select the preset number by rotating the GYRO TUNING dial, while it is still blinking (approx. 5 second)

4. Press the MEMORY button again to enter. The display stops blinking.

The station is now stored in the specified preset memory location.

(Using the remote control unit)

1. Tune into the desired radio station. (See the “MANUAL TUNING” or “AUTO TUNING”).

2. Tap the Memo on the remote control unit. “– –

” (preset number) starts blinking on the display.

3.Enter the desired preset number by tapping the numeric keypads.

Note:

•When entering a single digit number (2 for example), either input “02” or just input “2” and wait for a few seconds.

(Using the SR9600)

1. Press the F/P button to show the preset station on the display. Select the desired preset station by rotating the GYRO TUNING dial on the front panel.

(Using the remote control unit)

1. Tap the Presetorto select the desired preset station, or input the desired preset channel with the numeric keypad on the remote control unit.

CHECKING THE PRESET STATIONS

The preset broadcast stations can be checked on the onscreen display.

wed Jun 01		4:40pm
1/2	Tuner 1
	Tuner 1 : Main

1.

2.

(Using the remote control unit)

1. Tap the Info. to view a list of tuner preset stations on the onscreen display.

2. If there are 10 or more preset stations, press the Info. button again.

Note:

•The preset station indication disappears in about 5 sec.

(Using the remote control unit)

1. Tap the P-Scanon the remote control unit. “PRESET SCAN” appears on the display and then the preset station with the lowest preset number is recalled first.

2. Preset stations are recalled in sequence (No. 1 → No. 2 → etc.) for 5 seconds each.

No stored preset number will be skipped.

3. You can fast forward through the preset s t a t i o n s b y t a p p i n g t h e P r e s e t continuously.

When the desired preset station is received, cancel the preset scan operation by tapping the CLEAR or P-Scan.

59