Marantz SR9600 manual Technical Specifications, Dimensions

GENERAL MALFUNCTION

If the equipment malfunctions, this may be because an electrostatic discharge or AC line interference has corrupted the information in the equipment memory circuits. Therefore:

-disconnect the plug from the AC line supply

-after waiting at least three minutes, reconnect the plug to the AC line supply

-re-attempt to operate the equipment

Memory backup

•In case a power outage occurs or the power cord is accidentally unplugged, the SR9600 is equipped with a backup function to prevent memory data such as the preset memory from being erased.

HOW TO RESET THE UNIT

Should the operation or display seem to be abnormal, reset the unit with the following procedure.

With the SR9600 turned on, press and hold the MRAC and PURE DIRECT buttons simultaneously for 3 seconds or more.

Remember that the procedure will reset the settings of the function selector, Surround mode, delay time (tuner preset) etc., to their initial settings.

TECHNICAL SPECIFICATIONS

FM TUNER SECTION

Frequency Range		87.5 - 108.0 MHz
Usable Sensitivity		IHF 1.8 ∝V/16.4 dBf
Signal to Noise Ratio		Mono/Stereo 75/70 dB
Distortion		Mono/Stereo 0.2/0.3%
Stereo Separation		1 kHz 45 dB
Alternate Channel Selectivity		............... ± 300 kHz 60 dB
Image Rejection		98 MHz 70 dB
Tuner Output Level	1 kHz, ± 75 kHz Dev 800 mV

AM TUNER SECTION
Frequency Range	520 - 1710 kHz
Signal to Noise Ratio		50 dB
Usable Sensitivity	Loop 400 ∝V
Distortion	400Hz, 30 % Mod. 0.5%
Selectivity	± 20 kHz 70 dB
AUDIO SECTION
Power Output (20 Hz - 20 kHz/THD=0.08%)
Front L&R	8 ohms 140 W/Ch
Center	8 ohms 140 W/Ch
Surround L&R	8 ohms 140 W/Ch
Surround Back L&R	8 ohms 140 W/Ch
Front L&R	6 ohms 170 W/Ch
Center	6 ohms 170 W/Ch
Surround L&R	6 ohms 170 W/Ch
Surround Back L&R	6 ohms 170 W/Ch
Input Sensitivity/Impedance	200 mV/ 47 Kohms
Signal to Noise Ratio(Analog Input / Pure Direct)		105 dB
Frequency Response
(Analog Input / Pure Direct)
..........................................	8 Hz - 100 kHz (± 3 dB)
(Digital Input / 96 kHz PCM)
...........................................	8 Hz - 45 kHz (± 3 dB)
VIDEO
Television Format		NTSC
Input Level/Impedance	1 Vp-p/75 ohms
Output Level/Impedance	1 Vp-p/75 ohms
Video Frequency Response	5 Hz to 8 MHz (– 1 dB)
Video Frequency (Component) ...	5 Hz to 80 MHz (– 1 dB)
S/N		60 dB
HDMI
Version		1.1
GENERAL
Power Requirement	AC 120 V 60 Hz
Power Consumption		6.5 A
Weight	57.3 lbs (26.0 Kg)
ACCESSORIES
Remote Control Unit RC3200B		1
Microphone MC-10		1
AA-size Batteries		3
FM Antenna		2
FM Antenna Adaptor		2
AM Loop Antenna		2
Front AUX Jack Cover		1
AC cable		1
RS232C Cable		1

Specifications subject to change without prior notice.

DIMENSIONS

17-5/16 ins. (440 mm)

15/16 in. (23 mm)

17-5/16 ins. (440 mm) 19-1/16 ins. (483 mm)

13/16 ins. (20 mm)

7-7/8 ins.	(200 mm)	8-5/8 ins. (218 mm)
3/4 ins.	(18 mm)

ENGLISH

65