1.Make sure the correct modem type is selected in the Voice/ FAX software. Use “ Cirrus Logic” or similar selection. Do not select “Rockwell or Rockwell ICS” configuration.
Section Seven | - Specifications |
CCITT/Bell Std. | V.42bis, V.42, V.32bis, V.32, V.29, |
| V.27ter, V.22bis, V.22, V.21, V.17, |
| Bell212/103 |
MNP protocols: | MNP 5, 4, 3, 2 |
Host Interface: | 8 bit PC bus |
COM ports: | 1, 2, 3, 4 |
IRQ lines: | 2, 3, 4, 5 |
FAX Group: | Group III Send/Receive Standard |
FAX Command set:
Voice Command set: Cirrus Logic
Escape Detection: | TIES Escape Sequence |
Transmit level: | |
Receiver Sensitivity: | |
UART: | 16550 compatible |
Data format: | |
Power: | 0.75 W |
Temperature: | 0 to 55 degrees C (Operating); |
| degrees C |
Section Eight - Support and Service
In the unlikely event you experience difficulty in the use of this product, we suggest you: (1) consult the Troubleshooting section of this guide and (2) consult with your dealer. To obtain service for this product, follow the Return Merchandise Authorization Proce- dure as outlined in the Warranty card.
Section Nine - FCC , DOC & Other Notices
9.1 FCC Compliance
This equipment complies with Part 68 of the FCC Rules. On this equipment is a label that contains, among other information, the FCC registration number and Ringer Equivalence Number (REN) for this equipment. You must, upon request, provide this informa- tion to your telephone company.
If your telephone equipment causes harm to the telephone net- work, the Telephone Company may discontinue your service temporarily. If possible, they will notify in advance. But, if advance notice isn’t practical, you will be notified as soon as
17
