MaxTech V.32bis, V.42bis user manual DS=n, Commands are not echoed

T	touch-tone dialing
W	wait for second dial tone

,pause

@wait for five seconds of silence

!flash

;return to Command Mode after dialing

DS=n		Dial one of the four telephone numbers (n=0-
		3) stored in the modem’s non-volatile memory
E_	E0	Commands are not echoed
	E1	Commands are echoed

+++TIES Escape Characters - Switch from Data Mode to Command Mode

H_	H0	Force modem on-hook (hang up)
	H1	Force modem off-hook (make busy)
I_	I0	Display product-identification code
	I1	Factory ROM ID
	I2	Internal memory test
	I3	Device ID
	I4	Internal ID
L_	L0	Low speaker volume
	L1	Low speaker volume
	L2	Medium speaker volume
	L3	High speaker volume
M_	M0	Internal speaker off
	M1	Internal speaker on until carrier detected
	M2	Internal speaker always on
	M3	Internal speaker on until carrier detected and
		off while dialing
N_	N0	Connect only at DTE rate
	N1	Automatic rate negotiation
O_	O0	Return to Data Mode
	O1	Return to Data Mode and initiate an equalizer
		retrain
P		Set Pulse dial as default
Q_	Q0	Modem sends responses
	Q1	Modem does not send responses
Sr?	r=0-30 Read and display value in register r
Sr=n		Set register r to value n (r=0-30; n=0-255)
T		Set Tone Dial as default

7