MaxTech V.42bis, V.32bis user manual Basic AT Commands

3.3 Basic AT Commands

In the following listings, all default settings are printed

in bold text.

Command		Function
A		Manually answer incoming call
A/		Repeat last command executed. Do not precede
		A/ with AT or follow with ENTER
AT		Appears at the beginning of every command
		line
B_	B0	CCITT mode
	B1	Bell mode
D_		0 - 9, A-D, # and *
	P	pulse dialing
	R	originate calls in answer mode
	T	touch-tone dialing
	W	wait for second dial tone
	,	pause
	@	wait for five seconds of silence
	!	flash
	;	return to Command Mode after dialing
DS=n		Dial one of the four telephone numbers (n=0-
		3) stored in the modem’s non-volatile memory
E_	E0	Commands are not echoed
	E1	Commands are echoed

+++TIES Escape Characters - Switch from Data Mode to Command Mode

H_	H0	Force modem on-hook (hang up)
	H1	Force modem off-hook (make busy)
I_	I0	Display product-identification code
	I1	Factory ROM ID
	I2	Internal memory test
	I3	Device ID
	I4	Internal ID
L_	L0	Low speaker volume
	L1	Low speaker volume
	L2	Medium speaker volume
	L3	High speaker volume
M_	M0	Internal speaker off
	M1	Internal speaker on until carrier detected

7