MaxTech V.42bis, V.32bis user manual Unpacking Your Modem, Hardware Installation

Section One - Introduction

The 14.4 Kbps Series FAX/Voice/Data Modem con- nect your computer to all popular high speed modems available today. This manual describes the hardware instal- lation procedures for your new modem product. Additional information on AT commands and S-registers are provided so that your system can be customized for a particular operating environment.

Section Two - Installation

This section will provide step by step instructions on how to install your new 14.4 Kbps FAX/Voice/Data modem. Installation of this modem product is a two-step process consisting of actual hardware installation and communica- tion software installation and configuration.

2.1 Unpacking Your Modem

Before you begin your installation, be certain that you have all the items listed below. This package contains:

• A modem	• A telephone cable
• User's manual	• Software for the modem

•Software user's manual

2.2Hardware Installation

Installation of this modem requires opening and ma- nipulating your PC. Exercise caution at all times when working with AC powered and static-sensitive equipment. Turn off and unplug your PC before installation. Discharge any static electricity from your body by touching any metal surface.

1.Turn off and unplug your computer from the AC outlet.

2.Determine how many serial ports are built into your com- puter (examine the back of your computer). Refer to Figure 2-1 to identify common serial ports.

Figure 2-1 Common Serial Ports

male connector

1