Maytag 8113P574-60 important safety instructions During the Self-Clean cycle, After Self-Cleaning

5.Wipe up excess grease or spillovers from the oven bottom. This prevents excessive smoking, flare-ups or flaming during the clean cycle.

6.Wipe up sugary and acidic spillovers such as sweet potatoes, tomato, or milk-based sauces. Porcelain enamel is acid-resistant, not acid-proof. The porcelain finish may discolor if acidic spills are not wiped up before a self- clean cycle.

Important: Oven temperature must be below 400° F to program a clean cycle.

To set Self-Clean:

1.Close the oven door.

2.Move door lock lever right to the locked position.

5.Press the More+ or Less- pad to scroll through the self-cleaning settings.

“CL-H” (Heavy Soil, 4 hours) “CL-M” (Medium Soil, 3 hours) “CL-L” (Light Soil, 2 hours)

Choosing the soil level of the oven automatically programs the self-cleaning time.

6.After four seconds, CLEAN, DELAY and LOCK will appear in the display to show that the oven is set for a delayed clean operation. The delay time is displayed.

3. Press the Clean pad.

• “CLEAN” flashes in the display.

If the door is not closed, beeps will sound and “DOOR” will display. If the door is not closed within 45 seconds, the self-cleaning operation will be canceled and the display will return to the time of day.

4.Press the More+ or Less- pad.

• “CL-M” (Medium Soil, 3 hours) is displayed.

5.Press the More+ or Less- pad to scroll through

the self-cleaning settings.

“CL-H” (Heavy Soil, 4 hours)

“CL-M” (Medium Soil, 3 hours)

“CL-L” (Light Soil, 2 hours)

Choosing the soil level of the oven automatically programs the self-cleaning time.

6.After four seconds, the oven will start cleaning.

• The cleaning time will start counting down in the display.

If the oven has already been set for a clean cycle and you wish to set a delay:

1.Press the Delay pad.

•“DELAY” flashes.

•00:00 will appear in the display.

2. Press the More+ or Less- pad to set the amount of time you want to delay the cycle.

After four seconds, CLEAN, DELAY and LOCK will appear in the display to show that the oven is set for a delayed clean operation. The delay time is displayed.

When the Self-Clean cycle starts:

•“DELAY” will turn off.

•The clean time will appear in the display.

To cancel the Self-Clean cycle:

Press the CANCEL pad.

•All words disappear from the display.

•All functions are canceled.

•The time of day appears in the display.

•“LOCK” will appear in the display.

•“CLEAN” will appear in the display.

To delay a Self-Clean cycle:

1.Press the Delay pad.

•“DELAY” flashes.

•00:00 will appear in the display.

2.Press the More+ or Less- pad to set the amount of time you want to delay the cycle. Delay time can be set from ten minutes (00:10) to 11 hours, 59 minutes (11:59).

3.Press the Clean pad.

•“CLEAN” will flash.

4.Press the More+ or Less- pad.

•“CL-M” (Medium Soil, 3 hours) is displayed.

During the Self-Clean cycle

When LOCK shows in the display, the door cannot be opened. To prevent damage to the door, do not force the door open when LOCK is displayed.

Smoke and Smells

You may see some smoke and smell an odor the first few times the oven is cleaned. This is normal and will lessen in time.

Smoke may also occur if the oven is heavily soiled or if a broiler pan was left in the oven.

Sounds

As the oven heats, you may hear sounds of metal parts expanding and contracting. This is normal and will not damage the oven.

After Self-Cleaning

About one hour after the end of the self-clean cycle, LOCK will turn off. The door can then be opened. Move door lock

5lever to the left to unlock.