AUTOMATIC ICE AND WATER DISPENSER
(SELECT MODELS)
DISPENSING WATER AND ICE
Notes:
•When using the ice dispenser for the first time, discard the first two or three dozen cubes.
•When using the water dispenser for the first time, press the actuator pad for ten minutes to bleed the air from the water line. Discard the first five to six glasses of water dispensed. This will ensure pure and fresh water for drinking.
To dispense ice or water, position a glass against the top portion of the actuator pad and press. Hold the glass up to the ice opening to avoid spills.
To stop dispensing, release the pressure on the actuator pad and hold the con- tainer in position momentarily to catch the last pieces of ice or the last drops of water. The ice delivery door will remain open for a short time. When it closes, a closing sound can be heard.
CAUTION
To avoid personal injury or prop- erty damage, observe the fol- lowing:
•Do not put fingers, hands or any foreign object into dispenser opening.
•Do not use sharp objects to break ice.
•Do not dispense ice directly into thin glass, fine china or delicate crystal.
CRUSH, CUBE,
WATER PADS
The control pads are located on the dis- penser control panel.To select the desired function, touch the appropriate pad. When ice cubes, crushed ice or water pads are touched the selection is illuminated.
DISPENSER LIGHT
When the actuator pad is touched, the dispenser light automatically illuminates. To manually turn the light on, touch the 
pad.
To turn the light off, touch the pad again.
DISPENSER LOCK
To interrupt power to the water and ice dispenser so it cannot be used, touch the 
pad 3 times within 10 seconds.
The lock pad is illuminated when the dis- penser is locked. Touch the pad 3 times within 10 seconds again to unlock the ice and water service.
SPILL TRAY
DO NOT pour water into the Spill Tray grille at the bottom of the dispenser area. This is a spill area, NOT a drain. Normal, small spills will evaporate. Larger spills should be wiped up with a soft cloth or sponge. The grille slides out for clean up. It is recommended to clean the spill area occasionally to prevent mineral deposits.
12 |
ICE AND WATER
DISPENSING TIPS
•Some crushed ice may be dispensed even though cubed ice was selected. This happens occasionally when a few cubes are accidentally channeled into the crusher.
•Likewise, when changing from crushed ice to cubes, some crushed ice may be dispensed. This may also happen if
•If the “crushed” option is used fre- quently or exclusively, select the “cube” option occasionally to clear any crushed ice that may have built up in the chute.
•A slight pause may be noticed when dispensing crushed ice.This is normal because the ice is being channeled to the crusher. Crushed ice pieces will vary in size and shape.
•If the ice dispenser is not used fre- quently, ice cubes may clump together and may need to be broken apart or discarded.
•Do not add ice to the storage bin which was not produced by the ice- maker. It may not crush and/or dis- pense properly.
•Avoid operating the ice dispenser continuously for more than five min- utes. Remove large quantities from the bin by hand.
•Water from the dispenser is not as cold as ice water.The first glass or two of water dispensed each time may be warmer than subsequent glasses.
•To avoid splashing, fill the glass with ice before adding water.
