Mazda 4WD manual Trailer lamps, Using a step bumper, Trailer tow connector, Art=ranmc721a

Models: 4WD

1 268
Download 268 pages 17.24 Kb
Page 136
Image 136

JOBNAME: No Job Name PAGE: 136 SESS: 1 OUTPUT: Tue Apr 12 14:52:56 2005 /ford_pdm/ford/own2002/mbs/mpdiff

Tires, Wheels and Loading

WARNING: Do not connect a trailer's hydraulic brake system directly to your vehicle's brake system. Your vehicle may not have enough braking power and your chances of having a collision greatly increase.

The braking system of the tow vehicle is rated for operation at the GVWR not GCWR.

Trailer lamps

Trailer lamps are required on most towed vehicles. Make sure all running lights, brake lights, turn signals and hazard lights are working. See your authorized dealer or trailer rental agency for proper instructions and equipment for hooking up trailer lamps.

Using a step bumper

The optional step bumper is equipped with an integral hitch and requires only a ball with a 3/4 inch (19 mm) shank diameter. The bumper has a 2,000 lb. (907 kg) trailer weight and 200 lb. (91 kg) tongue weight capability.

The rated capacities (as shown in this guide) for trailer towing with the factory bumper are only valid when the trailer hitch ball is installed directly into the ball hole in the bumper. Addition of bracketry to either lower the ball hitch position or extend the ball hitch rearward will significantly increase the loads on the bumper and its attachments. This can result in the failure of the bumper or the bumper attachments. Use of any type of hitch extensions should be considered abuse.

Trailer tow connector

The trailer tow connector is located under the rear bumper, on the driver's side of the vehicle.

1

2

3

4

Refer to the following chart for information regarding the factory-equipped trailer tow connector:

136

CIMS #81318 com_trailer-lamps

itdseq=168

CIMS #710092

com_use-step-bumper.mbs itdseq=169

CIMS #476432

com_towconnect.ran itdseq=170

art=ranmc721_a

PAGE: 136 OP: root EDIT SESSION: 1 DATE: APR 12 2005 at 14:52 JOB: @ibm2/ford_pdm/CLS_ford/GRP_own2002/JOB_mbs/DIV_mpdiff

DIFF-MARKED Review Copy ÐÐ

(OLD=2005 B-Series fus Owners Guide (post-2002-fmt) 2nd Printing (#24721) (Nov-24-2004 11:18:53))

(NEW=2006 B-Series fus Owners Guide (post-2002-fmt) 2006 MBS CNE (#NoEntry) (Apr-12-2005 14:48:18)) 2006 B-Series(mbs), Owners Guide (post-2002-fmt)(own2002), Market: USA (fus)

Page 136
Image 136
Mazda 4WD manual Trailer lamps, Using a step bumper, Trailer tow connector, Art=ranmc721a