Mazda 4WD manual Resuming a set speed, Increasing speed while using speed control, Set speed

JOBNAME: No Job Name PAGE: 52 SESS: 1 OUTPUT: Tue Apr 12 14:52:56 2005 /ford_pdm/ford/own2002/mbs/mpdiff

Driver Controls

Disengaging the speed control will not erase previous set speed.

Note: When you use the clutch pedal to disengage the speed control, the engine speed may briefly increase, this is normal.

Resuming a set speed
Press the RES (resume) control and
release it. This will automatically	art=rancf330_a
return the vehicle to the previously
set speed. The RES control will not
work if the vehicle speed is not
faster than 30 mph (48 km/h).
Increasing speed while using speed control
There are three ways to set a higher
speed:	art=rancf331_a

• Press and hold the SET + control until you get to the desired speed, then release the control.

•Press and release the SET +

control to operate the Tap-Up function. Each tap will increase the set speed by 1 mph (1.6 km/h).

•Use the accelerator pedal to get to the desired speed. When the vehicle reaches that speed press and release the SET + control.

Reducing speed while using speed control

There are three ways to reduce a

set speed: art=rancf332_a

•Press and hold the CST - control until you get to the desired

speed, then release the control.

•Press and release the CST - control to operate the Tap-Down

function. Each tap will decrease the set speed by 1 mph (1.6 km/h).

52

PAGE: 52 OP: root EDIT SESSION: 1 DATE: APR 12 2005 at 14:52 JOB: @ibm2/ford_pdm/CLS_ford/GRP_own2002/JOB_mbs/DIV_mpdiff

DIFF-MARKED Review Copy ÐÐ

(OLD=2005 B-Series fus Owners Guide (post-2002-fmt) 2nd Printing (#24721) (Nov-24-2004 11:18:53))

(NEW=2006 B-Series fus Owners Guide (post-2002-fmt) 2006 MBS CNE (#NoEntry) (Apr-12-2005 14:48:18)) 2006 B-Series(mbs), Owners Guide (post-2002-fmt)(own2002), Market: USA (fus)