Mazda 4WD manual Low fluid level, High fluid level, 250, Art=ranmc129b Art=ranmc132a

JOBNAME: No Job Name PAGE: 250 SESS: 1 OUTPUT: Tue Apr 12 14:52:56 2005 /ford_pdm/ford/own2002/mbs/mpdiff

Maintenance and Specifications

8. Remove the dipstick and inspect
the fluid level. Level should be	art=ranmc130_a
in the cross-hatched area.

9.If necessary, add fluid in 1/2 pint (250ml) increments through the filler tube until the level is correct at normal operating temperatures. Refer to the Lubricant specifications section in this chapter for the correct fluid type. The use of any other non-approved fluid may cause internal transmission damage.

10. Fluid can be checked at ambient
temperatures between 50±95°F	art=ranmc131_a
(10±30°C). DO NOT ADD fluid
until the transmission is at
normal operating temperatures or the transmission will be overfilled.

Low fluid level

Do not drive the vehicle if the fluid level is at or below the bottom of the dipstick.

High fluid level

Fluid levels above the safe range may cause overheating, shift and/or engagement concerns and internal transmission damage. If an overfill condition occurs, excess fluid should be removed by an authorized dealer.

CIMS #953919 com_trans-level.fly

itdseq=314

art=ranmc129_b

art=ranmc132_a

250

PAGE: 250 OP: root EDIT SESSION: 1 DATE: APR 12 2005 at 14:52 JOB: @ibm2/ford_pdm/CLS_ford/GRP_own2002/JOB_mbs/DIV_mpdiff

DIFF-MARKED Review Copy ÐÐ

(OLD=2005 B-Series fus Owners Guide (post-2002-fmt) 2nd Printing (#24721) (Nov-24-2004 11:18:53))

(NEW=2006 B-Series fus Owners Guide (post-2002-fmt) 2006 MBS CNE (#NoEntry) (Apr-12-2005 14:48:18)) 2006 B-Series(mbs), Owners Guide (post-2002-fmt)(own2002), Market: USA (fus)