Mazda 4WD manual Replacing front park/turn side marker bulbs

JOBNAME: No Job Name PAGE: 43 SESS: 1 OUTPUT: Tue Apr 12 14:52:56 2005 /ford_pdm/ford/own2002/mbs/mpdiff

Lights

3.Install the electrical connector into the plastic base until it snaps, locking it into position.

4.Turn the headlamps on and make sure they work properly. If the headlamp was correctly aligned before you changed the bulb, you should not need to align it again.

Replacing front park/turn side marker bulbs

1. Make sure headlamp switch is in

OFF position, then open theart=mbscf405_a hood.

2. Remove the screw from lamp assembly.

3.Disengage lamp assembly by pulling it straight forward. It has a snap fit.

4. Rotate bulb socket

counterclockwise and remove art=mbscf408_a from lamp assembly.

5. Carefully pull bulb straight out

of socket and push in the newart=dnomc306_a bulb.

6. Install the bulb socket in lamp assembly by turning clockwise.

7.Align the lamp on the vehicle and push to snap in place.

43

PAGE: 43 OP: root EDIT SESSION: 1 DATE: APR 12 2005 at 14:52 JOB: @ibm2/ford_pdm/CLS_ford/GRP_own2002/JOB_mbs/DIV_mpdiff

DIFF-MARKED Review Copy ÐÐ

(OLD=2005 B-Series fus Owners Guide (post-2002-fmt) 2nd Printing (#24721) (Nov-24-2004 11:18:53))

(NEW=2006 B-Series fus Owners Guide (post-2002-fmt) 2006 MBS CNE (#NoEntry) (Apr-12-2005 14:48:18)) 2006 B-Series(mbs), Owners Guide (post-2002-fmt)(own2002), Market: USA (fus)