How to Operate the MVP871
Your McIntosh MVP871 has been configured for default operating settings that will allow you to immediately enjoy superb video and high fidelity audio from a wide variety of discs. If you wish to make changes to the default settings, a Setup feature is provided to customize the operating settings using On Screen Menus (refer to the Setup instruc- tions in this manual on page 18). Most operations that can be performed with the Front Panel
Note: Some of the MVP871 operating functions such as Disc Languages, Video Angle or Menu Language are active only if the function is supported by data encoded on the disc.
Power On
The Red LED above the STANDBY/ON switch lights to indicate the MVP871 is in Standby mode. To Switch ON the MVP871, press the STANDBY/ON
Notes: When AC Power is initially applied to the MVP871 the unit will momentarily switch On and then go into the Standby Mode. If a disc has already been loaded in the MVP871, just press the PLAY
How to Load a DVD, SACD or CD Disc
1.Press the OPEN/CLOSE
Note: When the player is in Standby Mode, the MVP871 Power will automatically
2.Press the OPEN/CLOSE
to play without pressing the PLAY
Note: If a CD is placed in the tray and the PLAY
How to Play a DVD Disc With a disc already loaded into the MVP871, press the PLAY
Note: When a DVD Video or Audio Disc is first started, the Disc’s
��������
��������
Figure 72
Figure 71
40