McIntosh MVP871 owner manual Press the

How to Operate the MVP871, con’t

13. Press the		used spar-
Right		ingly, they
directional		can make a
Push-but-		significant im-
ton to		provement in
select the		the appearenc-
Moving		es of the video
Pictures		image, over
Experts		use can also
Group		have the op-
(MPEG)	Figure 88	posite effect.	Figure 89
Noise Reduction (NR) Level Setting. Use the Up or		17. Press the SELECT Push-button to select the On-
Down directional Push-buttons to reduce noise of		Screen Gamma Graph. Use the Right or Left
the contours arround letter charcters and other similar		directional Push-buttons to highlight the desired
objects present in the image, the setting is ON or OFF.		adjustment point on the Gamma Curve. Use the Up
14. Press the Right directional Push-button to select		or Down directional Push-buttons to make fine
the Setup Level. Use the Up or Down directional		adjustments to image. Press the SELECT Push-button
Push-buttons to adjust intensity of the Color Black in		to return to the Gamma Display. The values indi-
the image, the setting is 0IRE or 7.5IRE.		cated are for each of the ten adjustment points on the
15. Press the Right directional Push-button to select the		Gamma Graph. Refer to figure 90.
Image’s Horizontal Position on the screen. Use the		When the desired adjustments are complete press the SE-
Up directional Push-button to shift the image to the		LECT Push-
right or use Down directional Push-buttons to shift		button to exit
the image to the left, range of adjustment is -7 to +7.		the Gamma
Note: The Horizontal Position adjustment is active for		settings and
the Component Video Outputs with the Progressive		press the PIC
Scan Mode active and HDMI Outputs.		ADJ Push-
16. Press the Right directional Push-button to select the		button to exit
Image’s Vertical Position on the screen. Use the Up
		the Picture
directional Push-button to shift the image up or use
		Adjustments.
Down directional Push-buttons to shift the image
down, range of adjustment is -7 to +7.
			Figure 90
Note: The Vertical Position adjustment is active for the		Note: The Picture Setting changes are stored in memory

Component Video Outputs with the Progressive	until new values are entered.
Scan Mode active and HDMI Outputs.
To exit the Memory 1 Adjust 3 Mode press the SELECT
Push-button. To make additional video adjustments, use
the Right directional Push-button to select Memory 1
Adjust 4 and press the SELECT Push-button. If no other
adjustments are to be made at this time, exit by pressing
PIC ADJ Push-button. Refer to figure 89.
The last Picture Adjustment is known as Gamma Cor-
rection. This effects the linearity of “Gray Scale” values
in an image. A Gray Scale consists of an image containing
the color Black and the color White with different intensi-
ties of the color Gray, e.g. Black and White Movie. The
Gamma Correction Adjustment in the MVP871 allows for
very fine adjustment of 10 different segments in the “Gray
Scale”, one segment at a time. When these adjustments are
	49