McIntosh MVP871 owner manual SETUP, con’t, Component Video Out

SETUP, con’t

press the Right directional Push-button to select the Video Menu Icon Tab. Refer to figure 24.

Note: If there is a Disc playing in the MVP871 press the STOP Push-button twice before pressing the SETUP Push-button.

2.Use the Down directional Push-button on the Re- mote Control to select the TV TYPE Menu. Refer to figure 29.

3.To change from

the default
setting use the
Right direc-
tional Push-
button fol-
lowed by Up
or Down
directional
Push-buttons
and then press	Figure 29
the SELECT
Push-button.

Note: The title of the icon button-bar will change color from yellow (the cursor color) to blue indicating the selected item.

4.Return to the Video Setup Menu by pressing the Left followed by the Up directional Push-buttons.

5.Next continue to the COMPONENT VIDEO OUT Settings. If no other changes are to be made in Setup Mode at this time, exit by pressing the RTRN (Return) Push-button.

Note: The SETUP Push-button may also be pressed to exit the setup mode.

Component Video Out

This selects the video signal format available at the Com- ponent Video Jacks to match the capabilities of the con- nected TV/Monitor. To change from the default setting of Progressive perform the following steps:

Note: The Progressive Scan Circuitry in the MVP871 of- fers the highest possible analog video picture quality available when the Component Video Outputs of the MVP871 are connected to a TV/Monitor capable of Progressive Scan. Unlike a conventional TV with Odd and Even Scanning Lines that are interlaced together to form a picture, the Progressive Scanning Mode scans all the lines of picture information both Odd and Even at one time, non-interlaced.

1.Press the SETUP Push-button on the Remote Control to access the Language Setup Menu. Then press the Right directional Push-button to select the Video Setup Menu Icon Tab. Refer to figure 24.

Note: If there is a Disc playing in the MVP871 press the STOP Push-button twice before pressing the SETUP Push-button.

2.Use the Down directional Push-button on the Re- mote Control to select the COMPONENT VIDEO

OUT Menu. Refer to figure 30.

Figure 30

CAUTION: DO NOT use the MVP871 DVD Player’s Progressive Video Display Mode unless you are certain the TV/Monitor connected to the MVP871’s Componet Video Output jacks is capable of displaying a Progressive Scan Signal. Failure to do so could result in pos- sible damage to the TV/Monitor. If you are not sure about the capability of the TV/Moni- tor connected to the MVP871 Component Video Output, refer to the Owner’s Manual supplied with the set and/or contact your McIntosh Dealer for assistance. In order

to switch the MVP871 Component Video Output to the Interlace Mode (non Progres- sive Scan), the MVP871 will first have to be connected to a TV/Monitor having either Progressive Scan capability or can except either S-Video or Composite Video Signals.

3.To change from the default setting use the Right directional Push-button followed by Up or Down directional Push-buttons and then press the SELECT Push-button.

Note: The title of the icon button-bar will change color from yellow (the cursor color) to blue indicating the selected item. Not all High definition TV/Moni- tor sets are fully compatible with the MVP871 and may cause artifacts to be displayed in the picture. In the case of Progressive Scan picture problems, it is recommened to switch off the Progressive Scan feature in the MVP871 and instead use the built-in Progressive Scan feature of the TV/moni- tor. For additional information please contact your McIntosh Dealer.

27