McIntosh How to Operate the MVP871, How to Play a SACD Disc, Back Track/Chapter, Stop Mode

How to Operate the MVP871

How to Play a SACD Disc	Note: If the FF(Fast Forward) or REV(Reverse) Push-
With a disc already loaded into the MVP871, press the	button is pressed several times, the speed of the
PLAY Push-button on the Front Panel of the MVP871 or	Frame Advance will increase. An On-Screen Icon
Remote Control. The Disc will start playing the first selec-	will appear during the Rapid Frame Advance Mode
tion of the SACD Layer; this could be either the Multi-	indicating the advance speed.
	3. To cancel the Rapid Frame Advance Feature press the
channel Tracks or 2- Channel Tracks depending on the disc
	PLAY Push-button.
contents.
To change from the default Multichannel Tracks to	Back Track/Chapter
either SACD 2-Channel or CD Tracks, press the SACD/CD
	Advance back to the beginning of the Track/Chapter
Push-button on the Front Panel or Remote Control, until
	currently playing by momentarily pressing the BACK
the desired track’s format title appears (Multi, Stereo or
	Push-button on the MVP871. Repeated momentary presses
CD) on the alphanumeric display. Refer to figures 71, 72
	of the BACK Push-button will allow for rapid selection
and 73.
	of the desired previous Tracks/Chapters.
Note: The MVP871 remembers the layer selected (SACD
Multichannel, SACD Stereo or CD) from the last SACD	Next Track/Chapter
Disc played. The next SACD played will start with the
same layer selected.	For each momentary press of the NEXT Push-button the
The Player will load the Table of Contents (Number of	MVP871 will advance to the next Track/Chapter. Repeated
tracks and Total Playing Time) at this time. To start play-	momentary presses of the NEXT Push-button will allow
ing the desired format press the PLAY Push-button.	for rapid selection of the desired Track/Chapter.
Note: Changing between the formats can be accomplished at
any time by performing the above procedure.	Fast Forward or Reverse
How to Play a CD Disc	Press and release the FF (Fast Forward)or REV (Re-
	verse) Push-button to search back and forth rapidly
With a disc already loaded into the MVP871, press the	through a Track/Chapter on a disc at 2 times normal speed.
PLAY Push-button on the Front Panel of the MVP871 or	An On-Screen Icon will appear on the screen and the audio
Remote Control. Refer to figures 71 and 72.	will be muted. If the FF (Fast Forward) or REV (Re-
How to Pause a Disc	verse) Push-button is pressed and released several times,
	the speed will increase to a maximum of 5 times normal
This feature allows the temporary stopping of disc play-	speed. To return to normal playback press the PLAY
back. Refer to figures 71, 72 and 73.	Push-button.
1. When playing a Disc, press the PAUSE Push-button
to temporarily stop playback.	Stop Mode
Note: After the Pause Feature is activated, with a DVD-	Press the STOP push-button once to stop disc playback.
Video Disc in the MVP871, each additional press of	Press PLAY and the disc will start playing again from
the PAUSE Push-button will permit the video to
	the disc time where Stop was pressed. Press STOP twice
advance one frame at a time.
	for a complete stop and return to the beginning of a disc.
2. Press the PLAY Push-button to cancel pause and
	Note: With a DVD Disc, Video information from the disc will
resume playing the disc.
	be muted during the Stop Mode, but will resume when
DVD-Video Rapid Frame Advance	the PLAY Push-button is pressed and playback starts.
	Using the Pause Push-button instead of the Stop Push-
The MVP871 allows for rapid scanning of DVD Video	button, will retain the video on the screen for viewing.
Frames both forward or backward directions at different	It is not advisable to keep the MVP871 in the Stop
speeds.	Mode (one push-button press) for any length of time as
1. When a disc is playing, press the	the Laser Transport is still active.
PAUSE Push-button to stop
playback.
2. Press the FF(Fast Forward) or
REV(Reverse) Push-button to
activate the Rapid Frame Ad-	Figure 73
vance.

41