McIntosh MVP871 owner manual Digital Interface Setup, con’t, Audio Setup

Figure 11

Digital Interface Setup, con’t

4.Return to the Video Setup Menu by pressing the Left followed by the Up directional Push-buttons.

5.Next continue to the AUDIO SETUP Settings. If no other changes are to be made in Setup Mode at this time, exit by pressing the RTRN (Return) Push-button.

Note: The SETUP Push-button may also be pressed to exit the setup mode.

Audio Setup

The Audio Setup selects the number of channels and ad- ditional settings of the Digital Audio Signal leaving the MVP871 through the connection.

1.Press the SETUP Push-button on the supplied Remote Control to access the On-Screen Language Setup Menu. Then press the Right directional Push-but- ton to select the Digital Interface Setup Tab. Refer to figures 5 (on page 20) and 9.

Figure 9

Note: If there is a Disc playing in the MVP871, press the STOP Push-button twice before pressing the SETUP Push-button.

2.Use the Down directional Push-button followed by the Right directional Push-button on the Remote

Control to select Audio Setup. Refer to figure 10. The 2CH default setting passes thru a two channel digital audio signal and a

two channel digital audio signal down

mixed from a multi- channel disc.

Note: If either of the MUL- TIchannel settings below are chosen, the

MVP871 Au-	Figure 10
dio Setup’s

Audio Channel Menu item automatically switches to MULTI CHANNEL and will use the same settings as

the Audio Setup for Speakers Configuration, Channel Levels and Delay Time; the only exception being there is no SW+10dB adjustment.

The MULTIchannel (NORMAL) setting passes thru the digital audio signal unaltered.

3.To change from 2CHannel setting to the MULTIchan- nel (NORMAL) use the Up or Down directional Push-buttons followed by the SELECT Push-button. Refer to figure 10.

The last setting MULTIchannel (LPCM), will decode the Digital Audio Signal from the disc and will re-encode it into a digital PCM Audio Signal. It will also allow ad- justments for Speaker Configuration, Channel Level and Delay Time.

The circuitry in the MVP871 queries the Inputs of all the components connected, looking for the number of channels. The number of channels displayed On Screen and their possible adjustments are determined by the re- sults of the query.

4.To change from 2CHannel setting to the MULTIchan- nel (LPCM) use the Up or Down directional

Push-buttons followed by the SELECT Push- button. Refer to figure 10.

5. The HDMI Speaker Setup Menu will now appear On- Screen. Refer to figure 11.

Notes: The title of

the icon button-bar will change color from yellow (the cursor color) to blue indicating the selected item. The following steps for Multichannel Loud- speaker Adjustments (Speaker Configuration, Channel Level and Delay Time) are also the same for a 2-Channel Loudspeaker System. If the query detected a 2-Channel Audio component connected, only the Front Left and Right Menus items will be adjustable.

LOUDSPEAKER SIZE CONFIGURATION:

In the steps below the size of the Loudspeakers will be entered into setup. The LARGE Setting refers to the Loudspeaker capability for reproducing bass frequencies down to 35Hz within -3dB of the midrange frequencies. If a Loudspeaker can not reproduce bass frequencies down to

22