ADSL Configuration

The ADSL Configuration page allows the user to set the configuration for ADSL protocols.

Trellis: This field allows the user to enable or disable the Trellis Code. By default, it is always enabled.

Handshake Protocol: This field allows the user to select the ADSL handshake protocol.

Wiring Selection: This field allows the user to enter the wiring selection for the RJ-11. Tip/Rip is the default for the board without the inner/outer pair relay

Bit Swapping: This field allows the user to enable or disable the upstream bit swapping.

Advanced

Rev. 1 - YML672

www.netcomm.com.au

NB1300_2 ADSL Modem

Page 49

Page 49
Image 49
NetComm NB1300 Plus 4W manual Adsl Configuration