Field | Setting Details |
Service name: | Any name to describe your ISP. |
User Name: | Your ISP will provide a case sensitive User Name in a |
| format similar to your email address. Contact your ISP |
| for details. |
Password: | Enter your Password as supplied by your Service |
| Provider (characters are usually all lower case). |
Disconnect timeout: | 0 ❖ |
|
|
Mode/Wan Connection Type: | PPPoE LLC or PPPoA |
VPI: | 8 ❖ |
|
|
VCI: | 35 ❖ |
|
|
Static IP Address: | 192.168.241.101❖ |
|
|
Subnet Mask: | 255.255.255.0❖ |
|
|
Default Gateway: | 0.0.0.0 ❖ |
|
|
Bridge mode: | Disabled ❖ |
|
|
❖Default Setting. Although in most cases you will not be required to alter these default settings for your NB1300, your ISP may identify specific settings to enable connection to their service. Please refer to your ISP or Network Administrator for further information.
d.Click Submit and then click the Save Setting and Reboot button from the bottom of the menu. Wait for the configuration to complete.
Step 3: Configuring your Computer to use the NB1300
Most applications call for the Primary and Secondary DNS server entries to be made on each computer. These can be automatically assigned by another DHCP server or by enabling the DHCP server on the NB1300 ADSL Modem, and entering the DNS values in the DNS section of the NB1300.
Gateway USB
Rev. 1 - YML672 | www.netcomm.com.au |
NB1300_2 ADSL Modem | Page 31 |
