Note: You must click the Submit button on every page that you make changes on and when you have made all your changes click the Save Setting and Reboot button from the bottom of the menu.

c.Click on the One Page Setup link under the Basic menu. You do not need to change the LAN settings unless you need the NB1300 to work with an existing network on a subnet other than 192.168.1.x.

Gateway USB

You will need to Change your WAN and VC settings as provided by your ISP. The following lists an example of the most common ISP settings used in Australia. The fields that require changing from the default settings are highlighted.

www.netcomm.com.au

Rev. 1- YML672

Page 30

NB1300_2 ADSL Modem

Page 30
Image 30
NetComm NB1300 Plus 4W manual Gateway USB