Web Based Interface
If you are unable to access the NB1300 ADSL Modem’s Web Based Interface from a computer on your local network, check the following:
■Check the Ethernet connection between your computer and your NetComm ADSL Modem.
■Make sure your computer’s IP address is on the same subnet as your ADSL Modem. If you are using the recommended addressing scheme, your computer’s address should be in the range of 192.168.1.1 to 192.168.1.254.
Note: If your computer’s IP address is shown as 169.254.x.x: Recent versions of Windows and MacOS will generate and assign an IP address if the computer cannot reach a DHCP server. These
■If your ADSL Modem’s IP address has been changed and you don’t know the current IP address, reset your ADSL Modem’s configuration to factory defaults. This will set the ADSL Modem’s IP address to 192.168.1.1.
■Make sure your browser has Java, JavaScript, or ActiveX enabled. If you are using Internet Explorer, click Refresh to be sure the Java applet is loaded.
■Try quitting the browser and launching it again.
■Make sure you are using the correct login information. The factory default login name is admin and the password is password. Make sure that Caps Lock is off when entering this information.
If your ADSL Modem does not save changes you have made in the Web Based Interface, check the following:
■When entering configuration settings, be sure to click the Submit button before moving to another menu or tab, or else your changes will be lost.
■Once all of the changes are made, click the save settings button to save your settings. The unit will then automatically reboot itself. Once completed, your modem is ready for use.
Click the Refresh or Reload button in your Web browser. The changes may have occurred, but the Web browser may be caching the old configuration settings. In this case clear your web browser cache and refresh again.
Rev. 1 - YML672 | www.netcomm.com.au |
NB1300_2 ADSL Modem | Page 73 |
