McIntosh MVP871 owner manual SETUP, con’t, Auto Format

Models: MVP871

1 52
Download 52 pages 28.66 Kb
Page 25
Image 25
Auto Format
Figure 22
Figure 21

SETUP, con’t

Note: The SETUP Push-button may also be pressed to exit the setup mode.

Auto Format

TV/Monitors with Fixed Pixel Display, such as DLP, LCD, LiCos and Plasma all have native resolution that all incom- ing video signals are converted to. The MVP871 allows for both manual and automatic selection of video resolution.

The default setting PANEL RES. will output the Digital Video signal at the native resolution of the TV/Monitor. The MAX RES. will set the video output resolution to the maximum resolution the TV/Monitor process.

When the Front Panel Format is set to “Y, CR, CB AUTO” the circuitry inside the MVP871 will automatically select the appropriate resolution.

1.Press the SETUP Push-button on the supplied Remote Control to access the On-Screen Language Setup Menu. Then press the Rightdirectional Push-but- ton to select the Digital Interface Setup Tab. Refer to

figures 5 (on page 20) and 21.

Note: If there is a Disc playing in the MVP871, press the STOP Push-button twice before pressing the

SETUP

Push- button.

2. Use the Downdirec- tional Push- button on the Remote Control to select HDMI Auto Format. Refer to figure 22.

3.Use the Right

directional Push-button followed by the Upor Downdirectional Push-buttons to select MAX RES. Then press the SELECT Push-button.

4.Next continue

to the Video Setup Menu item starting on page 26. If no other changes are to be made in Setup Mode at this time, exit by pressing the RTRN (Return) Push-button.

Note: The SETUP Push-button may also be pressed to exit the setup mode.

25

Page 25
Image 25
McIntosh MVP871 owner manual SETUP, con’t, Auto Format