How to Operate the Setup Mode
Your McIntosh MVP871 has been factory configured for default operating settings that will allow you to immedi- ately enjoy superb video and high fidelity audio from a DVD-Video. It also reproduces DVD-Audio, SACDs and CDs with unparalleled sonic purity. If you wish to make changes to the factory default settings, a Setup feature is provided to customize the operating settings using the On Screen Display (OSD) Menus.
The On-Screen Menuing System is interactive and the ability to change a given setting or whether some menus appear, is dependent on the operational state of the player and the choices made in other menu items. If a disc is play- ing in the MVP871 and the STOP Push-button is pressed once (the disc playback is paused), some but not all menu items are available for change. To make all of the menu items available for possible change, the playback of the disc must be stopped which requires two presses of the STOP Push-button.
Notes: The MVP871 must be connected to a MONI- TOR/TV either through an A/V Control Center or directly, for setup and use. The Remote Control supplied with the McIntosh MVP871 has several Push-buttons that are labeled differently than as indicated on the On Screen Menu, please refer to the following Setup Instructions in this Owner’s Manual for the correct Push-button.
1.The Red LED above the STANDBY/ON switch lights to indicate the
MVP871 is in Standby mode. To Switch ON the MVP871,
press the
STANDBY/ON
Push-button on the Front Panel or on the Remote Con-
trol either the PWR(Power) or POWER ON
Push-button.
Refer to figures 1 and 2.
Note: When AC Power is initially applied to the MVP871 the unit will momentarily switch On and then go into the Standby Mode.
2.Press the SETUP Push-button on the Remote Control and the LANGUAGE SETUP Menu will appear on the Monitor/TV screen. Refer to figures 2 & 3.
Note: There are six Main Menu Icon Tabs located at the Top of the On-Screen Setup Display. The Icon Tabs are named Language Setup, Digital Interface Setup, Video Setup, Audio Setup, Ratings and Other Setup.
3.Access the desired Main Menu Icon Tab by pressing the Right or Left directional Push-buttons on the supplied Remote Control. Then use the Up or Down directional Push-buttons followed by the SELECT Push-button for the desired choice.
Note: Some menu choices require more than one step to complete.
4.After all the desired setup adjustments are complete, press the SETUP Push-button to exit the Setup Mode.
Note: Some changes made to the menu options will not occur until after the SETUP Mode has been exited.
Main Menu Icon Tabs
Figure 3