STEP 9) SIDE BURNER ASSEMBLY:

Insert the Side Burner (44) and the Electrode Wire through the front of the large hole in the Side Table. (FIG. 9A) Install the burner tube end over the valve nozzle. (FIG. 9B) Secure the Burner to the bracket with two M4x8mm Screws (45). (FIG. 9B) Pass the Electrode Wire through the opening at the top left corner of Side Panel for later connection to Ignition Box. (See also Wiring the Ignition Box.)

(44) SIDE BURNER- (46) ELECTRODE WIRE

(45)M4 X 8MM

SCREW

 

 

 

 

 

 

Fig. 9A

 

Fig. 9B

 

 

 

 

 

BURNER TUBE END INSTALLED

OVER VALVE NOZZLE

BURNER SECURED WITH

TWO M4x8mm SCREWS (45)

PASS THE ELECTRODE WIRE THROUGH THE OPENING AT THE TOP LEFT CORNER OF SIDE PANEL FOR LATER CONNECTION TO IGNITION BOX.

STEP 10) SIDE BURNER KNOB/GRID ASSEMBLY:

Align the flat keyed hole in the Control Knob (47) with the keyed stem of the valve. (FIG. 10) Push the Side Burner Knob onto the Valve stem.

Place the Side Burner Grid (48) onto the Side Burner Table letting the three protruded ends fall into the three holes in around the Side Burner.

(47) CONTROL KNOB

(48) SIDE BURNER GRID

PUSH SIDE BURNER KNOB (47) ONTO VALVE STEM

10

FIG. 10

Page 10
Image 10
Meco 8452-5-SS1 manual Side Burner Assembly, Side Burner KNOB/GRID Assembly